SAE 1026 Tubing specification chart
Size: 6mm-323.8mm.
Schedule: 10-XXS / Thk.
Shape: Round or Special sections.
Length: Single random length/ Double random length or as customer's actual request.
Grade: SAE 1026 / AISI 1026 / GRADE 1026.
Mechanical Behaviour of NOM B-203 Grade 1026
Cut to length AS 1443 Grade K1026 Seamless Tubing from ready stock
| Properties | Metric | Imperial |
| Tensile strength | 490 MPa | 71100 psi |
| Yield strength | 415 MPa | 60200 psi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (In 50 mm) | 15.00% | 15.00% |
| Reduction of area | 40.00% | 40.00% |
| Hardness, Brinell | 143 | 143 |
| Hardness, Knoop (converted from Brinell hardness) | 163 | 163 |
| Hardness, Rockwell B (converted from Brinell hardness) | 78 | 78 |
| Hardness, Vickers (converted from Brinell hardness) | 149 | 149 |
ASTM A512 Grade 1026 Dimensions
| Outside Diameter Tolerances for Round Hot-Finished Tubing A, B, C | ||
|
Outside Diameter Size Range, In.(mm) |
Outside Diameter Tolerance, in. (mm) | |
| Over (+) | Under (-) | |
| up to 2.999 (76.17) | 0.020 (0.51) | 0.020 (0.51) |
| 3.000-4.499 (76.20-114.27) | 0.025 (0.64) | 0.025 (0.64) |
| 4.500–5.999 (114.30–152.37) | 0.031 (0.79) | 0.031 (0.79) |
| 6.000–7.499 (152.40–190.47) | 0.037 (0.94) | 0.037 (0.94) |
| 7.500–8.999 (190.50–228.57) | 0.045 (1.14) | 0.045 (1.14) |
| 9.000–10.750 (228.60–273.05) | 0.050 (1.27) | 0.050 (1.27) |
| A. Diameter tolerance is not applicable to normalized and tempered or quenched and tempered conditions.
B. The common range of sizes of hot finished tubes is 11⁄2 in. (38.1 mm) to 103⁄4 in. (273.0 mm) outside diameter with wall thickness at least 3 % or more of outside diameter, but not less than 0.095 in. (2.41 mm). C. Larger sizes are available, consult manufacturer for sizes and tolerances. |
||
UNS Grade G10260 Tube Size Schedule Chart
HF-Hot Finished
CW-Cold worked
RT-Rough Turned
G– Ground
SAE J412 Grade 1026 Thermal Treatments
A-Annealed
N– Normalized
QT-Quenched and Tempered
SR-Stress Relieved or Finish Anneal
Hot Tags: sae 1026 tubing specification chart, China sae 1026 tubing specification chart manufacturers, suppliers, factory, dip galvanized steel pipe, galvanized steel pipe corrosion, GI PIPES, Galvanized Steel Pipe, 2x2 galvanized square tubing, ASTM A53 Galvanized Steel Pipe
