Products Description
Cold-rolled steel is steel produced by cold rolling. Cold rolling is a steel plate obtained by further rolling the No. 1 steel plate to a target thickness at room temperature. Compared with hot-rolled steel sheets, cold-rolled steel sheets have more accurate thickness, smooth and beautiful surface, and also have various superior mechanical properties, especially in terms of processing performance. Because cold-rolled raw coils are relatively brittle and hard, they are not suitable for processing, so usually cold-rolled steel sheets are required to be annealed, pickled and surface-leveled before being delivered to customers. The maximum thickness of cold rolling is below 0.1--8.0MM. For example, the thickness of cold-rolled steel sheets in most factories is below 4.5MM; the minimum thickness and width are determined according to the equipment capacity of each factory and market demand.
Products features
Cold Rolled Steel Coil has superb sheet shape and surface quality with good flatness and surface finish. The surface of the cold sheet is clean and bright and easy for coating.
The varieties of cold rolled steel sheet are widely used in:
Galvanized Substrates
Home Appliances
Tubing
Automobiles
Building
Enamels
Other Industries
As a leading cold rolled steel coil (CR) manufacturer, GNEE adheres to strict quality standards to produce our cold rolled steel coils. We guarantee our products meet our customer's requirement.
| Item Name | Cold Rolled Steel Coil |
| Thickness | 0.2-2.0mm |
| Width | 600-1500mm |
| Hardness | 50-71 (CQ Grade) |
| Hardness | 45-55 (DQ Grade) |
| Yield Strength | <270 (CQ Grade) |
| <240 (DQ Grade) | |
| Tensile Strength | 240-410 (CQ Grade) |
| 240-370 (DQ Grade) | |
| Elongation Percentage | 28 |
| 34 |
GNEE
Amidst the vast land of China and the majestic Taihang Mountains lies Anyang, Henan Province, located on the eastern foothills of the Taihang mountain range. It is one of the eight ancient capitals of China and home to an outstanding steel supply chain enterprise – GNEE GROUP.
GNEE GROUP, established in 2008 with a registered capital of 5 million yuan, has grown into a comprehensive steel supply chain enterprise after more than a decade of hard work and perseverance. It has five subsidiaries located in different countries and regions, including Anyang, Tianjin, Hong Kong, Zhengzhou, and Singapore, and its influence has reached out around the world.
Q: Can your product be customerized?
A: Considering differences in voltage, frequency and other speciality of transformer product in different countries and regions,our product can be customerized according to your requirements.
Q: What is the price of shipping?
A: Depending upon the port of delivery, prices varies.
Q: What should provide to make custom transformer?
A: Technical drawing and specification documents are the best, or you can list key parameters for designing.
Q: Could I have your catalog and price list?
A: Price may change based on material market. Welcome to contact for accurate price via Made-in-China or company official website.
Hot Tags: cr320p cold rolled automotive steel coil, China cr320p cold rolled automotive steel coil manufacturers, suppliers, factory, 0 2 mm Thickness Cold Rolled Steel for Automobile, C16r Cold Rolled Steel Sheet For Automotive Steel, S890q S890ql S960ql High Tensile Automotive Sheet, QStE380TM Grade Automotive Steel Sheet, Automotive Steel ENDC01 C690 High Strength, Cold Rolled Steel for Martensitic High Strength Automobile
