Our 1.0330 DC01 cold-rolled steel plate has good performance. Through cold rolling, you can get cold-rolled strip and steel plate with thinner thickness and higher precision. It has high flatness and high surface finish. The surface of DC01 steel plate is clean and bright, easy to It can be used for coating and plating processing with many varieties and wide uses. It also has the characteristics of high stamping performance, non-aging and low yield point. It has been widely used in automobiles, printed iron barrels, construction, building materials, bicycles and other industries. It is also used in the production of organic coatings. The best choice for layer steel plates.
|
Standards |
ASTM JIS AISI GB DIN |
|
Type |
Sheet/Plate |
|
Thickness(mm) |
0.3-3.0mm |
|
Width(mm) |
1000/1219/1250/1500mm (customized) |
|
Grade |
|
|
Surface Treatment |
Anti rust, Rolled And Annealed,Film |
|
Processing Service |
Slitting, Cutting, Punching, customized service |
DC01 EN10130 Low carbon and ultra-low carbon steel mechanical and process performance:
| Country (Region) | Standard | Chemical Composition (ladle analysis), %, ≤ | Surface quality | Deoxidation | Classification | ||||
| Steel name (Steel number) | C | Mn | P | S | |||||
| European Union | EN 10130 | DC01 (1.0330) | 0.12 | 0,60 | 0,045 | 0,045 | A, B | Manufacturer's discretion | Non-alloy quality steel |
| EN 10152 | DC01+ZE (1.0330+ZE) | A, B | |||||||
| EN 10139 | DC01-C390, C340, C440, C490, C590, C690 | – | |||||||
Notes:
EN 10130 – Cold rolled low carbon steel flat products;
EN 10152 – Electrolytically zinc coated cold rolled steel flat products.
EN 10139 – Cold rolled uncoated low carbon steel narrow strip.
EN 10139 DC01 Steel Mechanical properties:
| Standard | Designation | Delivery condition | Symbol | Yield strength (MPa), 0.2 % offset | Tensile strength (MPa) | Elongation, A80, ≥ % | Elongation, A50, ≥ % | Hardness, HV | Validity of the mechanical properties |
| EN 10139 | DC01 (1.0330) | Annealed | A | – | 270 – 390 | 28 | 30 | ≤ 105 | 3 months |
| Skin passed | LC | ≤ 280 | 270 – 410 | 28 | 30 | ≤ 115 | |||
| Work hardened | C290 | 200 – 380 | 290 – 430 | 18 | 20 | 95-125 | |||
| C340 | ≥ 250 | 340 – 490 | Not required | Not required | 105-155 | ||||
| C390 | ≥ 310 | 390 – 540 | 117-172 | ||||||
| C440 | ≥ 360 | 440 – 590 | 135-185 | ||||||
| C490 | ≥ 420 | 490 – 640 | 155-200 | ||||||
| C590 | ≥ 520 | 590 – 740 | 185-225 | ||||||
| C690 | ≥ 630 | ≥ 690 | ≥ 215 |
Electrolytic Zinc Coatings
| Coating Designation | Nominal zinc coating values for each surface | Minimum zinc coating values for each surface | ||
| Thickness, µm | Mass, g/m² | Thickness, µm | Mass, g/m² | |
| ZE25/25 | 2,5 | 18 | 1,7 | 12 |
| ZE50/50 | 5,0 | 36 | 4,1 | 29 |
| ZE75/75 | 7,5 | 54 | 6,6 | 47 |
| ZE100/100 | 10,0 | 72 | 9,1 | 65 |
DC01 Steel Equivalent Material
Material 1.0330, DC01 steel equivalent to ASTM, ISO, European (German DIN, British BSI, France NF), Japanese JIS and Chinese GB standard (for reference).
Note: DIN 1623 has been replaced by DIN EN 10130, and the designation ST12 has been replaced by DC01.
1.0330 steel sheet show
Application Of DC01 metal sheet
DC01 metal sheet can be used in automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, food cans, etc.
product quality inspection
We GNEE Steel will conduct various tests on the products, such as punching test, bending test, coating thickness test, etc. We also accept third-party quality inspections, such as SGS, ISO9001-2008, BV, CE, CCIC commodity inspection, etc. In addition, we can also provide deep processing services, such as cutting, slitting, profiling, punching, bending, etc.
Participate in exhibition activities
Customer case
Our cold-rolled steel plates have been successfully exported to the United States, India, Saudi Arabia, Vietnam, Tanzania, Kenya, Ghana, Cote d'Ivoire, Cameroon, Azerbaijan, Uzbekistan, Kazakhstan, Kyrgyzstan and other countries. As of 2023, it has been sold to 150+ countries, with 5,000+ customers, and 2,000+ customers on an ongoing basis.
Product packaging
professional team
GNEE STEEL
GNEE STEEL, which has been engaged in steel materials since 2008, is located in Anyang City, China. Its main product is cold-rolled steel. Advanced automation equipment and strong production capacity cover an area of 226,000 square meters, with 8 production lines and 3 cold-rolled steel production lines. In 2019, it supplied more than 1.07 million tons of steel to 46 countries around the world. Quality assurance, SGS, ISO, MTC, CE certification. Adequate inventory, professional ordering system, and trustworthy pre-sales and after-sales services.
If you are looking for 1.0330 DC01 steel, you can contact us:
Email: gi@gneesteel.com
Whatsapp/Wechat: +8615824687445
Hot Tags: dc01 cold-rolled steel sheet, China dc01 cold-rolled steel sheet manufacturers, suppliers, factory, Spcc Steel Plate, Full Hard GL Galvalume Steel Coil, Cold Rolled SPCC Steel, 1 5mm galvanised steel sheet, cold reduced steel sheet, gi roofing
