General Product Description
API Specification 5L is the American Petroleum Institute's specification for seamless and welded line pipe for use in petroleum transportation systems in the petroleum and natural gas industries. SSAB produces plate and coil skelp (the input material to a pipe manufacturing operation) for conversion by a pipe mill into welded line pipe. The specific type of pipe manufacturing operation may alter the mechanical properties of the skelp and consequently orders for skelp by pipe mills are typically each unique relative to the specified skelp quality level, delivery condition, chemical composition limits, and the specified as-delievered skelp properties based on the pipe manufacturing operation and the intented application for the line pipe. As a result, all inquiries for skelp orders are subjected to review. In the pipe body, API 5L Grade X42 pipe has a specified minimum yield strength of 42.1 ksi.
Available Dimensions
All orders are subject to review for applicability for specific pipe manufacturing method. Inquire for other thickness, width, or plate length availability.
Hide/Show specific columns EDIT
| GRADE | PRODUCT TYPE | THICKNESS (in) |
WIDTH (in) |
LENGTH (in) |
|---|---|---|---|---|
| Grade X42 | Coils | 0.250 - 0.750 | 60 - 96 | - |
| Grade X42 | Plate | 0.375 - 1.00 | 60 - 120 | 500 |
Mechanical Properties
Hide/Show specific columns EDIT
| GRADE |
|---|
| Grade X42 |
| Grade X42 |
Chemical Composition
Composition meets PSL2 (X42M) requirements. Inquire for SSC/HIC performance.
Hide/Show specific columns EDIT
| GRADE | C (MAX wt %) |
MN 1) (MAX wt %) |
P (MAX wt %) |
S (MAX wt %) |
SI (MAX wt %) |
CU (MAX wt %) |
NI (MAX wt %) |
MO (MAX wt %) |
NB (MAX wt %) |
V (MAX wt %) |
TI (MAX wt %) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Grade X42 | 0.22 | 1.30 | 0.025 | 0.015 | 0.45 | 0.50 | 0.30 | 0.15 | 0.05 | 0.05 | 0.04 |
| GRADE | C (MAX wt %) |
MN 1) (MAX wt %) |
P (MAX wt %) |
S (MAX wt %) |
SI (MAX wt %) |
CU (MAX wt %) |
NI (MAX wt %) |
MO (MAX wt %) |
NB (MAX wt %) |
V (MAX wt %) |
TI (MAX wt %) |
|---|
1) For each reduction of 0.01% below the specified maximum for C, an increase of 0.05% above the specified maximum for Mn is permitted up to a maximum of 1.65% .
Carbon Equivalent
Composition meets PSL2 (X42M) requirements.
Hide/Show specific columns EDIT
| GRADE | Grade X42 |
|---|---|
| Thickness (in) | 0.250 - 1.00 |
| CEIIW (max wt %) | 0.43 |
| Pcm (max wt %) | 0.25 |
Hot Tags: api line pipe steels, China api line pipe steels manufacturers, suppliers, factory, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe, EN10210 Hot Dip Galvanized Oil Drilling Pipe, Q345B Galvanized Steel Pipe, ASTM A53 GI Galvanized Steel Pipe, Sch 40 80 Seamless Galvanized Steel Pipe
