General Product Description
ASTM A1011 is a standard specification for hot-rolled, steel sheet and strip and coils of carbon steel, structural steel, high-strength low-alloy steel, high-strength low-alloy steel with improved formability, and ultra-high strength steel. The specification covers steel sheet, strip, and coils in thicknesses less than 0.230 in. A1011 High-Strength Low-Alloy Steel (HSLAS) Grade 45 has a specified minimum yield strength of 45 ksi.
Available Dimensions
Hide/Show specific columns EDIT
| GRADE | PRODUCT TYPE | THICKNESS (in) |
WIDTH (in) |
|---|---|---|---|
| HSLAS Grade 45 Class 1 | Coils | 0.188 - 0.229 | 60 - 98 |
Mechanical Properties
Tensile testing is performed in the longitudinal direction.
Hide/Show specific columns EDIT
| GRADE | THICKNESS (in) |
YIELD STRENGTH (MIN ksi) |
TENSILE STRENGTH (MIN ksi) |
ELONGATION IN 2" (MIN %) |
|---|---|---|---|---|
| HSLAS Grade 45 Class 1 | 0.188 - 0.229 | 45 | 60 | 25 |
Chemical Composition
(Heat analysis, wt. %.)
Hide/Show specific columns EDIT
| GRADE | C (MAX %) |
MN (MAX %) |
P (MAX %) |
S (MAX %) |
TI 1) (MIN %) |
V 1) (MIN %) |
CB 1) (MIN %) |
NI (MAX %) |
MO (MAX %) |
CU 2) (MIN %) |
CR (MAX %) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HSLAS Grade 45 Class 1 | 0.22 | 1.35 | 0.04 | 0.04 | 0.005 | 0.005 | 0.005 | 0.20 | 0.06 | 0.20 | 0.15 |
1) One or more of Cb, V, and Ti may be added. When added the min for that element applies, if not added then there is no minimum requirement.
2) Copper steel with 0.20% minimum Cu.
Hot Tags: astm a1011, China astm a1011 manufacturers, suppliers, factory, ASTM A53 GI Galvanized Steel Pipe, Q345B Galvanized Steel Pipe, Sch 40 80 Seamless Galvanized Steel Pipe, EN10210 Hot Dip Galvanized Oil Drilling Pipe, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe
