Why should you use BS EN 10130 - Low carbon steel flat products?
Low carbon steel possesses up to 0.30 percent of carbon content. This class of steel is commonly used for flat-rolled products like sheets or strips. Low carbon steel flat products have a huge range of applications in various industries such as steel frame buildings, machinery parts, cookware, pipelines, metal gates, fencing, etc.
BS EN 10130 provides you with guidance on technical delivery conditions to be considered for the low carbon steel flat products. It gives the specifications for performing tests on low carbon steel flat products, which helps the users to verify the properties such as deoxidation, chemical composition, mechanical properties weldability, etc. of steel flat products.
BS EN 10130 lays down the detailed information about the different tests to be performed, the apparatus needed to perform the test, explains the sampling, and helps the users to execute other steps relevant to the tests.
Users of BS EN 10130 can check the aspects of low carbon steel flat products which gives them proper fit and designs for steel products. It helps users to determine the exact room for error while manufacturing particular products for particular applications.
EN 10130-DC04 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.08 | ≤0.030 | ≤0.030 | ≤0.40 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-210 | 270-350 | ≥38 | ||
EN 10130-DC05 Cold Rolled Coil
| C | P | S | Mn | Ti |
| ≤0.06 | ≤0.025 | ≤0.0250 | ≤0.35 | - |
| Yield Strength Mpa | Tensile Strength Mpa | Elongation(Thickness) | ||
| 140-180 | 270-330 | ≥40 | ||
Cold rolled steel sheet for drawing and forming applications is produced in a broad spectrum of grades meeting specifications as listed in the tables below. The most suitable specification can be selected, depending on the intended end-use and severity of fabrication. All Drawing and Forming specifications may be welded by most standard welding processes. All cold rolled drawing steels can readily be painted. Refer to the paint manufacturers' prescribed methods for pre-treatment and application.
Dimensional tolerances
Tolerances on shape and dimensions are given in Data Sheet: Cold Rolled Product Tolerances (file reference B1.1).
Coil inside diameter
The standard inside diameter is 508mm (610mm on enquiry).
Corrosion prevention
Unless adequately protected, cold rolled sheet is susceptible to corrosion, and customers are advised to take precautions as set out in Data Sheet: Cold Rolled Products (file reference B1).
Hot Tags: cold rolled en 10130/10131, China cold rolled en 10130/10131 manufacturers, suppliers, factory, EN10210 Hot Dip Galvanized Oil Drilling Pipe, Sch 40 80 Seamless Galvanized Steel Pipe, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe, Q345B Galvanized Steel Pipe, ASTM A53 GI Galvanized Steel Pipe




