EN 1.4539 / UNS N08904 / 904L
EN 1.4539 / UNS N08904 / 904L

EN 1.4539 / UNS N08904 / 904L

Applications AISI 904L is a high alloy low carbon austenitic stainless steel with good general corrosion resistance. EN 1.4539 is fully austenitic but is less sensitive to precipitation of sigma phase than conventional austenitic grades with high molybdenum content. Areas of applications are...
Send Inquiry
Chat Now

Get a free quote! Contact us today!

Send E-mail: sale@gneegi.com

Tel: +86 15824687445

Applications

AISI 904L is a high alloy low carbon austenitic stainless steel with good general corrosion resistance. EN 1.4539 is fully austenitic but is less sensitive to precipitation of sigma phase than conventional austenitic grades with high molybdenum content.

Areas of applications are process equipment in chemical industry, petrochemical industry, bleaching equipment in the pulp and paper industry, flue gas cleaning, desalination, seawater handling, hydrometallurgy, food and beverage, pharmaceuticals and heat exchangers.

Heat Treatment – Solution annealing at 1050°C – 1150°C followed by rapid cooling in air or water.

Weldability – Very good. Low heat input recommended.

Weight % C Mn P S Si Cr Ni Mo N Cu
Min.           19,0 24,0 3,00   1,20
Max. 0,020 1,20 0,030 0,010 0,70 21,0 26,0 4,50 0,50 2,00

 

General:

PED 2014/68/EU Annex I section 4.3

AD2000 W0 (W2/W10)

NACE MR0175/ISO 15156-3 and NACE MR0103/ISO 17945

Plate, sheet and coil:

ASTM A240, EN 10028-7, EN 10088-2, EN 10088-4

Bar and forging:

ASTM A276, ASTM A479, ASTM A182, EN 10088-3

Other products:

As per applicable ASTM and/or EN standards

Yield strength Rp0.2,
MPa
Yield strength Rp1.0,
MPa
Tensile strength Rm,
MPa
Elongation
[%]
Hardness
[HB]
ASTM A240 ≥ 230   520 – 720 ≥ 35 ≤ 90
PLATE CR (COIL) ≥ 240 ≥ 270 530 – 730 ≥ 35 ≤ 90
PLATE HR (COIL) ≥ 220 ≥ 260 530 – 730 ≥ 35 ≤ 90
PLATE (QUARTO) ≥ 220 ≥ 260 520 – 720 ≥ 35 ≤ 90

Hot Tags: en 1.4539 / uns n08904 / 904l, China en 1.4539 / uns n08904 / 904l manufacturers, suppliers, factory, ASTM A53 Gr A Hot Rolled Galvanized Steel Pipe, Q345B Galvanized Steel Pipe, Sch 40 80 Seamless Galvanized Steel Pipe, EN10210 Hot Dip Galvanized Oil Drilling Pipe, ASTM A53 GI Galvanized Steel Pipe