There are numerous examples of hones, although all these examples consist of either one or more abrasive stones that are held under pressure against the surface of the Honing Cylinder Tubes they are worked upon.
However, there is an improvement also noted on the surface of these Honed Tubes. Because honing is an expensive process, honing is performed on Hydraulic Honed Tubes which require the most superlative degree of precision. One of the main benefits of using Bright Finish Seamless Honed Tubes is that they are precise and have an accurate form, with a smoother inner surface.
Specification Chart of Hydraulic Honed Tubes
Hot Finished Honing Cylinder Tubes with Skived or Honed bore
Graded:St 52
Max length:14m.
Metric size: Inside diameter from 40 to 250mm
Type: cold drawing
Straightness:0.5 /1000
Tolerance INT:ISO H9
| ID m/m |
OD m/m |
ID m/m |
OD m/m |
ID m/m |
OD m/m |
||
| 20 | 25 | 60 | 70 | 80 | 100 | ||
| 20 | 30 | 60 | 80 | 90 | 105 | ||
| 25 | 30 | 63 | 73 | 95 | 110 | ||
| 25 | 35 | 65 | 75 | 100 | 114 | ||
| 30 | 40 | 70 | 80 | 110 | 120 | ||
| 35 | 45 | 70 | 90 | 120 | 140 | ||
| 40 | 50 | 80 | 90 | 125 | 140 | ||
| 50 | 60 | 80 | 95 |
Most Famous Types Of Honed Tubes
Hydraulic Honed Tubes
Honed Tubes
Hydraulic Tubes
Honing Cylinder Tubes
Pre Honed Tube
Ready to Honed Tube
Honed Seamless Tubes
Bright Finish Seamless Honed Tubes
hydraulic cylinder honed tube
Hydraulic Tubes Material Standards
| Our Material | Material No. | Similar International Grade | Suitable for… |
|
JIS G3445 STKM13C |
ASTM MT1020 / BS ERWC3 / DIN ST45 / NF TU37b / ISO TS4 | Carbon steel tubes for machine structural purpose | |
| DIN 2391 ST52 | 1.0580 |
JIS STKM19A / ASTM 1524 / EN E355 / ISO TS18 | Mechanical and automotive engineering |
| ST52 BK+S | 1.0580 | Low deformability without heat treatment after cold forming process and stress-relief annealing | |
| DIN 2393 ST52.3 | 1.0570 | ISO Gr.1 | Construction of chemical plant, pipe work and mechanical engineering use |
| ASTM A106 | 1.0405 | JIS STPT410 / BS HFS410 / DIN ST45.8 / NF TU42c | Seamless carbon steel pipe for high temperature service Suitable for bending, flanging, welding and similar forming operations |
Honing Cylinder Tubes Quality Standards
Pre Honed Tube & hydraulic cylinder rods exporter in India
DIN 2391 Seamless Precison Steel Tubes
EN10305 Steel Tubes for Precision Applications Seamless Cold Drawn Tubes
ASTM A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
JIS G3445 Carbon Steel Tubes for Machine Structural Purposes
Pre Honed Tube Steel Grades
ST52 ST45 E355 1020 1026
Ready to Honed Tube Product Processing
Raw materials- Cold drawn/rolled- Heat treatment (BKS)- Honed - packing.
| Processing Way | Cylinder Barrel ID (mm) | Max Length (mtr) | Straightness (mm/mtr) | ID Tolerance | Wall Thickness Tolerance (mm) | ID Roughness (μm) |
| Cold Drawn | 40-320 | 12 | 0.2-0.5 | H8-H10 | ±5% | 0.8-1.6 |
| Cold Rolled | 12-100 | 12 | 0.2-0.5 | H8-H10 | ±5% | 0.8-1.2 |
| Cold Drawn+Honed | 40-500 | 8 | 0.2-0.3 | H7-H9 | ±5% | 0.2-0.8 |
| Cold Drawn-SRB | 40-400 | 7 | 0.2-0.3 | H8-H9 | ± 5% | 0.2-0.4 |
| Deepth Drilling-Honed | 320-1100 | 8 | 0.2-0.3 | H7-H9 | ±8% | 0.2-0.8 |
| Deepth Drilling-SRB | 320-600 | 7 | 0.2-0.3 | H8-H9 | ±8% | 0.2-0.4 |
Hot Tags: jis stkm 13c/ astm a106/ sae 1020/ din st 52 welded honing cylinder tubes, China jis stkm 13c/ astm a106/ sae 1020/ din st 52 welded honing cylinder tubes manufacturers, suppliers, factory, gi pipe seamless, Al Zn Mg Coated Steel Plate, Hot Dipped Galvalume Steel Sheet, Non Oriented Electrical Steel Coil, hot dipped galvanized rolled coil, 316 ss coils
