Products Description
55% aluminum-zinc alloy coated steel is a high-performance metal coating material. It forms an alloy coating of 55% aluminum, 43.4% zinc and 1.6% silicon on the surface of the steel substrate through a hot-dip plating process. It is suitable for scenarios that require long-term corrosion protection (more than 15 years), heat and weather resistance, or full life cycle cost optimization, and has become the preferred solution to replace galvanizing and some stainless steel.
Product Video
Products Specification
Al-Zn Alloy Coated Steel Coil
|
Item |
Parameters/Description |
|
Substrate material |
Low carbon steel (such as DX51D, DX52D, SGH340, etc.) |
|
Coating composition |
55% aluminum, 43.4% zinc, 1.6% silicon (in accordance with ASTM A792/A792M or equivalent standards) |
|
Coating thickness |
Double-sided coating: 60-150g/m² (conventional), customizable |
|
Specification range |
Thickness: 0.2-3.0mm; Width: 600-1500mm; Coil weight: 3-15 tons |
|
Surface treatment |
Smooth, matte, embossed or color coating pre-treatment |
|
Corrosion resistance |
Salt spray test ≥1000 hours (red rust area ≤5%, ASTM B117) |
|
Heat resistance |
Can withstand high temperature of 315℃ for a long time (short-term peak of 400℃) |
|
Applicable environment |
Harsh environments such as high humidity, industrial areas, coastal areas, etc. |
Products Advantages
55% Al-Zn Alloy Coated Steel Coil
Super corrosion resistance: The composition of the aluminum-zinc alloy layer is 55%Al-43.5%Zn-1.5%Si, and its lifespan is 2-3 times that of pure galvanizing, especially suitable for high humidity and coastal environments.
High temperature resistance: 55%aluminum-zinc steel can withstand high temperatures of 315℃ for a long time (galvanizing is only 200℃), suitable for thermal equipment such as chimneys and ovens.
Economic and durable: Aluminum-zinc plating saves 20% of the cost compared to galvanizing under the same lifespan, and is 60% lower than stainless steel. It is the first choice for photovoltaic brackets and granary roofs.
Self-healing: The aluminum-zinc phase forms a dense protective film, and the scratched area still has anti-corrosion ability.
Lightweight: It can be 10-15% thinner than galvanizing under the same corrosion resistance, reducing transportation and installation costs

Products Applications
Construction: roofs, wall panels, ventilation ducts, rainwater drainage systems.
Home appliance manufacturing: oven back panels, air conditioner housings, water heater liner.
Transportation: truck bed panels, refrigerated truck interlayers.
Agriculture: granaries, greenhouse structures, livestock equipment.




Storage and transportation
55% aluminum zinc alloy coated steel should be stored in warehouses and other indoor places, kept dry and ventilated, and should not be stored for a long time in acidic climates. When stored outdoors, it is necessary to prevent rain and avoid condensation caused by oxidation stains.


About Us
GNEE Group strictly follows domestic and foreign trade practices, regards reputation as life, and provides all customers with the best quality products and the most complete services. The company has established a complete service system and technical support system, not only providing customers with the best quality products, but also providing complete after-sales service. We have established a stable and lasting cooperative relationship with many customers by virtue of integrity, high-quality products, reasonable prices and sincere services.



Hot Tags: 55% aluminum zinc alloy coated steel coil, China 55% aluminum zinc alloy coated steel coil manufacturers, suppliers, factory, galvanized steel coil for roofing sheet, gi spangle, hot dipped galvanized rolled coil, gi sheet roll, hot dipped steel coil, coil galvanized





