What pretreatment is required before machining Q355 stainless steel used in the medical industry?
Answer: The core pretreatment includes three points: ① Surface rust and oil removal (using pickling, sandblasting, and shot blasting processes to remove oxide scale, oil stains, and rust, achieving a surface cleanliness level of Sa2.5), to avoid impurities affecting subsequent processing and surface treatment; ② Raw material leveling and straightening to control the flatness and straightness of sheet/profile to meet precision machining requirements; ③ Preheating treatment (150-200℃) for thick plates (≥20mm) to reduce the risk of cracking during cold working and welding.
What are the machining accuracy requirements for Q355 structural components in medical equipment?
A: The tolerances vary depending on the type of equipment. For core precision structural components (such as CT scanner gantry connections and operating table adjustment mechanisms): dimensional tolerances ≤ ±0.05mm, and form and position tolerances (parallelism, perpendicularity) ≤ ±0.02mm; for general load-bearing structural components (such as equipment bases and medical cart frames): dimensional tolerances ≤ ±0.5mm, and form and position tolerances ≤ ±0.2mm; for peripheral support components (such as operating table supports): dimensional tolerances ≤ ±1mm are sufficient.
Q355 What are the post-weld treatment processes required in the medical industry after welding structural components?
A: ① Clean slag promptly after welding and inspect weld quality (no porosity, slag inclusions, cracks, incomplete penetration, etc.; weld reinforcement ≤ 2mm); ② Perform stress-relief annealing on precision structural components (heat to 550-600℃, hold for 1-2 hours, then cool with the furnace) to eliminate welding stress and prevent later deformation; ③ Grind and polish the weld and surrounding area to remove sharp edges (all metal structural components in medical equipment must be free of sharp corners, with a fillet radius ≥ R2) to avoid scratching medical staff and patients.
What are the mainstream surface treatment processes for Q355 in the medical industry, and what scenarios are they suitable for?
A: All are surface treatments for non-contact human use. Mainstream processes and their compatibility: ① Electrostatic powder coating (epoxy powder/polyester powder): Suitable for operating tables, medical carts, and IV stands; scratch-resistant, easy to clean, and can use medical-grade environmentally friendly pigments; ② Electrophoretic coating: Suitable for CT/MRI machine racks and sterilization equipment housings; uniform coating, strong adhesion, and better corrosion resistance than powder coating; ③ Hot-dip galvanizing: Suitable for outdoor medical support brackets and large equipment bases in hospitals; resistant to outdoor corrosion; ④ Sandblasting + passivation: Suitable for internal connections of precision structural components; retains the metal's natural color and does not affect assembly accuracy.
What are the special requirements for Q355 surface treatment coatings in the medical industry?
A: ① Environmental friendliness: The coating must comply with the RoHS directive and the environmental requirements for medical equipment, and must not release harmful substances such as formaldehyde or heavy metals (lead, cadmium, mercury); ② Cleaning resistance: The coating must withstand repeated wiping with common medical disinfectants such as alcohol, chlorine-containing disinfectants, and iodine, without peeling or fading; ③ Adhesion: The coating adhesion must reach grade 0 of GB/T 9286, and the scratch resistance must be ≥3H (pencil hardness); ④ Odorless: The coating must have no irritating odor after curing, to avoid affecting the hospital's treatment environment.

