Are galvanized coils used for cutter guards on harvesters?

Nov 20, 2025 Leave a message

1.Why can galvanized coils be used?

Galvanized coils have rust-proof capabilities and can withstand certain humid environments in farmland. From a corrosion prevention perspective, they are stronger than ordinary cold-rolled sheets.

galvanized coil

2.What are the reasons for "not frequently used"?

Insufficient Abrasion Resistance (The Most Critical Issue)

During operation, the cutter guard plate of a harvester comes into direct and intense friction with crops (especially rice and wheat straw) and any embedded soil and sand. The galvanized layer itself is relatively soft and has poor abrasion resistance.

Under continuous friction, the zinc layer will be quickly worn away. Once the steel substrate is exposed, corrosion will begin rapidly, rendering it ineffective for corrosion protection.

Insufficient Surface Hardness, Easily Scratched

During harvesting, the guard plate may encounter hard objects such as stones. The surface hardness of the galvanized layer is insufficient to resist such impacts and scratches, easily leading to zinc layer damage.

Cost and Process Issues

The guard plate needs to be formed through processes such as stamping and bending. When using galvanized coils (especially hot-dip galvanized coils) for stamping, the zinc layer may accumulate on the mold, affecting production efficiency and mold life. Simultaneously, the edges of stamping and bending will expose the substrate, becoming the starting point for corrosion.

Compared to more mainstream processing methods, using galvanized coil raw materials may not be economical.

galvanized coil

3.How to select a substrate?

The protective plate needs to have a certain strength and toughness, and is usually made of a specific grade of steel.

galvanized coil

4.What are the advantages of spraying after molding?

Strong coating adhesion: The phosphate layer provides an excellent substrate for coating adhesion.

High coating selectivity: Specialized coatings with excellent wear resistance and weather resistance can be sprayed. Some high-end agricultural machines use epoxy resin, polyurethane, and other coatings, whose comprehensive anti-corrosion and wear resistance performance far surpasses that of galvanized coatings.

Unified and aesthetically pleasing appearance: Can perfectly match the overall color of the machine.

All-around protection: The coating can completely cover every corner of the workpiece, including stamped and bent edges, which cannot be protected by the cuts and edges of galvanized coils.

 

5.How should high-end or critical parts be handled?

For some protective plates subjected to extreme wear, heat treatment methods such as quenching may be used to increase the hardness of the base material, or thicker steel plates may be used to extend the service life.