1.Why is galvanized coil the preferred material for photovoltaic briquettes?
Photovoltaic clamps (also known as "module clamps" or "clamps") are key structural components for securing solar photovoltaic panels. They require several core characteristics, all of which galvanized steel coils perfectly meet:
**Superior Corrosion Resistance.
Core Requirement: Photovoltaic power plants are typically installed outdoors, exposed to harsh environments such as wind, rain, sun, and salt spray (in coastal areas). Therefore, materials must possess extremely strong corrosion resistance to ensure a design life of over 25 years.
Advantages of Galvanized Steel Coil: The zinc layer acts as a sacrificial protective layer, providing excellent electrochemical corrosion protection for the steel substrate. Even with minor surface scratches, zinc preferentially corrodes, protecting the internal steel from rust. This perfectly meets the long lifespan requirements of photovoltaic systems.
Excellent Strength and Rigidity.
Core Requirement: The clamps need to withstand the weight of the photovoltaic panels as well as external forces such as wind and snow loads. They must possess sufficient strength and rigidity to prevent deformation or breakage, ensuring the safety of the entire photovoltaic array.
Advantages of galvanized coils: Their steel base provides good mechanical properties, and various stress requirements can be met by selecting steel of different strength grades (such as S280GD, S320GD) and appropriate thicknesses (usually 1.5mm-3.0mm).

2.What are the requirements for the thickness of the zinc coating on galvanized coils used in photovoltaic briquettes?
This is a key parameter determining corrosion resistance lifespan. The photovoltaic industry typically requires a high zinc coating thickness.
Common standards: Generally, a minimum zinc coating weight of Z180 (i.e., a total zinc coating weight of at least 180 grams per square meter) is required on both sides, corresponding to a zinc coating thickness of approximately 12.6 μm per side. In more corrosive environments (such as C4 highly corrosive industrial environments and C5-I marine environments), even Z275 or higher may be required.
Purpose: To ensure that the zinc coating is not completely corroded away within the design life of 25-30 years.

3.What are the requirements for substrate material and mechanical properties?
Grade: The most commonly used is DX51D+Z, as it emphasizes formability in deep drawing and bending. For higher strength requirements, structural grade grades such as S280GD+Z, S320GD+Z, and S350GD+Z are used (GD stands for hot-dip galvanized).
Thickness: Determined based on stress calculations, commonly ranging from 1.5mm to 3.0mm.

4.What are the requirements for surface treatment?
Spangle-free or small-spangle zinc coatings are preferred. A smooth and uniform surface facilitates subsequent passivation treatment.
Passivation treatment: The vast majority of galvanized coils used in photovoltaic briquettes undergo chromium-free passivation. This extremely thin chemical conversion film prevents "white rust" from forming during storage and transportation, further enhancing overall corrosion resistance and is a crucial step in ensuring long-term quality.
5.How does galvanized coil perform as the mainstream and recommended material for manufacturing photovoltaic panel briquettes?
With its excellent corrosion resistance, sufficient mechanical strength, good processability and highly competitive cost, it perfectly balances the triple requirements of photovoltaic systems for longevity, safety and economy.

