ASTM A36 A283 Q235 Q345 Ss400 SAE 1006 S235jr Mild Alloy Carbon Hot Rolled Boat Iron Sheet Ms Sheets Cold Rolled A36 Steel Plate

Mar 16, 2026 Leave a message

How to Choose Q235 Steel Plate Thickness for Medical Equipment?

Shell: 1.5–3mm; Frame/Base: 3–8mm; Load-bearing Frame: 5–12mm; Select based on equipment weight, vibration, and stability.

Which Quality Grade of Q235 Steel Plate is Preferred for Medical Applications?

Q235B/Q235C is preferred, as it has lower sulfur and phosphorus content and better impact toughness, making it suitable for structural components in medical equipment; Q235D is selected for low-temperature environments.

What are the differences in selection between Q235 and Q355 steel plates in medical scenarios?

Q235: Lower cost, better plasticity, used for light/medium-sized equipment and non-load-bearing frames.

Q355: Higher strength, used for heavy equipment and high-load-bearing frames, but higher cost and slightly more difficult welding.

What Surface Treatment Selection is Required for Q235 Steel Plates in Medical Equipment?

Preferred treatments include powder coating/electrostatic spraying (resistant to disinfection, rust prevention, and environmentally friendly); followed by spray painting; untreated steel is strictly prohibited (prone to rust and environmental pollution).

What are the dimensional tolerance requirements for Q235 steel plates used in medical applications?

According to GB/T 709, thickness tolerance is ±0.1–0.3mm (based on thickness), and dimensional tolerance is ±1–3mm to ensure equipment assembly accuracy.