Q: What are the surface quality requirements of Q355 coil?
A: According to GB/T 3274, the surface shall be free of cracks, scars and other defects, and the surface grade (such as FB/FC/FD) can be negotiated.
Q: What are the dimensional tolerances of Q355 coil?
A: The thickness tolerance is in accordance with GB/T 709, the width tolerance is generally ±5mm, the common coil weight is 10-30 tons, which can be customized according to customer requirements.
Q: What is the welding performance of Q355 coil?
A: It has good weldability. It is recommended to use low-hydrogen electrodes (such as E5015). Preheating (100-150℃) is required for thick plates or low-temperature environments, and slow cooling after welding to prevent cold cracks.
Q: What are the cold bending performance requirements of Q355 coil?
A: 180° cold bending test without cracks, the bending core diameter is based on the thickness and standard, such as the bending core diameter is 3a (a is the sample thickness) when the thickness is ≤16mm.
Q: Can Q355 coil be cut by gas cutting or plasma cutting?
A: Yes. The slag shall be cleaned after cutting, and preheating is required before cutting thick plates to prevent cracks.

