Black A36 Q235 Q195 Q355 Q345 S275jr Precision-Made Carbon Steel Sheet/Plate

Jan 22, 2026 Leave a message

Q: What is the maximum single weight that can be produced for Q355D steel?

A: Calculated based on standard dimensions, the maximum standard single weight is approximately 30 tons. The single weight for extra-wide and extra-thick plates can be negotiated. Customization is available within the steel mill's maximum lifting capacity.

Q: What are the surface quality grades of Q355D steel plates?

A: Following GB/T 3274-2017, they are divided into ordinary surface (FA) and higher-grade surface (FB). FB grade has fewer surface defects and can meet the requirements of high-appearance applications.

Q: What are the cold working properties of Q355D steel plates?

A: Good cold working properties. It can undergo conventional cold working such as bending, rolling, punching, and shearing. The recommended bending radius is ≥1.5 times the plate thickness (thickness ≤20mm). For thicker plates, the bending radius needs to be appropriately increased.

Q: Can Q355D steel be hot-worked? What is the hot-working temperature range?

A: Yes, it can be hot-worked. Hot forging and hot bending temperatures range from 900℃ to 1100℃, with a final forging temperature not lower than 800℃ to avoid coarse grains caused by low-temperature hot working.

Q: How is the weldability of Q355D?

A: Excellent weldability. It is an easily weldable low-alloy steel and requires no preheating (plate thickness ≤ 30mm, ambient temperature ≥ 5℃). For thick plates (≥ 30mm) or welding in low-temperature environments, preheating to 50~100℃ is required.