1.Why is waterjet cutting ideal for cold-rolled coils?
No Heat-Affected Zone (Core Advantage):
Waterjet cutting is a cold cutting process that does not generate high temperatures during the cutting process. This means:
No alteration to material properties: The mechanical properties (such as hardness, strength, and internal metallographic structure) of cold-rolled coils, acquired through precision rolling and annealing, are not compromised, and there is no hardening or thermal stress at the edges.
No thermal deformation: Extremely thin cold-rolled coils are highly sensitive to heat. Waterjet cutting avoids warping and micro-deformation of the sheet metal caused by high temperatures, ensuring the dimensional and flatness accuracy of the parts.
No harmful gases or slag produced: The material is not melted, therefore there are no toxic fumes or slag requiring secondary cleaning.
High cutting quality, enabling "fine" cuts:
Good cut quality: The cut is smooth, burr-free, or has very fine burrs (depending on parameters), and is usually ready for use without secondary processing.
High precision: Modern high-precision waterjet systems can achieve a positioning accuracy of ±0.05mm and a repeatability of ±0.025mm, fully meeting the processing requirements of precision parts.
Capable of cutting complex shapes: Through CNC control, any complex contour can be easily cut, including acute angles, small radius arcs and inner right angles, which is a flexibility that stamping dies cannot match.

2.How suitable are the materials?
Whether it's ordinary SPCC, DC01, or stainless steel (such as 304), aluminum alloy, copper, or other materials, waterjet cutting can perform high-quality cuts with equal care. For common surface treatments of cold-rolled coils (such as galvanizing, chrome plating, and color coating), waterjet cutting can also cut without damaging the coating properties (only causing a slight impact on the cut edge).

3.What is the range of cutting thickness?
The thickness of cold-rolled coils is typically between 0.3mm and 3.0mm, which is precisely the thickness range where waterjet cutting achieves the highest efficiency and quality. For thicker materials, waterjet cutting is possible, but the speed will decrease.

4.What are the key elements for waterjet "precision" cutting?
Abrasive Selection and Control:
Fine cutting typically uses finer abrasive (such as 80-mesh or 120-mesh garnet sand). Abrasive quality (hardness, particle uniformity) and purity directly affect the roughness and taper of the cut surface.
The abrasive supply system must be stable to ensure uniform mixing.
Parameter Optimization:
Pressure: Ultra-high pressure (e.g., above 380 MPa) helps achieve a smoother cut.
Cutting Speed: The speed must be matched to the material thickness and required precision. When pursuing precision, the speed needs to be appropriately reduced.
Abrasive Tube Diameter: Using a smaller diameter abrasive tube (e.g., 0.76 mm) can reduce the jet diameter, improve precision, and reduce material waste, but it will reduce cutting capacity.
Specialized Equipment and Software:
A high-rigidity machine tool platform and a servo system with good dynamic performance are required to maintain cutting accuracy at high speeds.
Specialized cutting software can optimize the cutting path, automatically compensate for cutting taper, and achieve "one-cut" technology, which is crucial for precision parts.
5.What are the conclusions and recommendations?
The product must not exhibit any thermal deformation or performance alteration (e.g., precision instrument parts, highly elastic parts).
The material is a combination of composite materials or an existing coating (e.g., color-coated steel sheet), requiring protection of the base layer or coating performance.
Small-batch, multi-variety, and complex-shaped trial production and manufacturing can be highly flexible without the need for mold making.
Extremely high requirements are placed on the quality of cut edges, with a desire to reduce or eliminate secondary processing.

