Can galvanized coils be used as base plates for elevator car interiors?

Nov 10, 2025 Leave a message

1.Why consider using galvanized coils?

Cost-effectiveness: Compared to commonly used stainless steel (especially 304 stainless steel), galvanized coils are significantly cheaper, a substantial advantage in budget-controlled projects.

Good corrosion resistance: The galvanized layer provides effective rust protection for the steel substrate, withstanding the effects of daily moisture and cleaning within the car, resulting in a long service life.

Ease of processing and forming: Galvanized coils possess excellent mechanical properties, allowing for easy cutting, stamping, and bending to manufacture components of various shapes, such as car wall panels and ceiling panels.

Ideal coating substrate: This is the most crucial point. The surface of galvanized coils provides an excellent base for subsequent decorative treatments.

galvanized coil

2.Why can't we use it directly?

Poor Appearance and Texture:

The exposed galvanized surface (whether ordinary zinc plating or a smooth finish) has an industrial, silvery-white appearance, lacking the refined and luxurious feel sought after in high-end elevators.

The surface is prone to scratches, and once the galvanized layer is scratched through, the underlying steel is exposed, affecting aesthetics and corrosion resistance.

Potential Insufficient Strength and Rigidity:

As interior wall panels, a certain level of rigidity and impact resistance is required. Thinner galvanized sheets are easily dented upon impact. They typically need to be combined with a supporting frame (such as square steel or aluminum profiles) to increase overall strength.

Fire Safety Considerations:

Elevators are special equipment with requirements for the fire resistance rating of materials. Steel itself is non-combustible (Class A), but if other coatings or films are applied to the galvanized sheet, the fire resistance of the entire composite structure must meet the standards.

galvanized coil

3.What are the advantages of using coated steel sheets as elevator base plates?

Process: High-quality galvanized coils (usually with small zinc spangles or a smooth surface) are used as the substrate, and a layer of PVC film or other polymer film is coated onto its surface using advanced processes.

Effects: A variety of decorative effects, including wood grain, colors, fabric textures, and stone patterns, can be achieved. The textures are realistic, the feel is pleasant, and it is highly wear-resistant, stain-resistant, and easy to clean.

Advantages: It combines the strength, rigidity, and low cost of galvanized steel sheets with the aesthetics and durability of decorative films. This is currently a very popular and cost-effective elevator interior decoration solution.

galvanized coil

4.What are the uses of powder coating/spray painting?

Process: After pretreatment (such as phosphating) of the galvanized sheet, electrostatic powder coating or painting is applied.

Results: A uniform colored surface can be obtained. Powder coating is thicker and more wear-resistant; painting offers a wider variety of options.

Note: It is essential to ensure excellent adhesion between the coating and the galvanized substrate; otherwise, peeling may occur due to vibrations generated by elevator operation.

 

5.What are some suggestions for selecting materials for elevator projects?

Do not directly specify "galvanized steel sheet" as the interior finish material, as this usually fails to meet aesthetic requirements.

Inquire with the elevator manufacturer or interior finish supplier about options such as "coated steel sheet" or "powder-coated steel sheet."

When confirming the use of a coating/powder coating solution, pay attention to the material of the substrate and the coating weight (e.g., using a galvanized substrate of GA100 or higher) to ensure the substrate's rust resistance and overall quality.