1.Why are pre-coated steel coils unsuitable for electrostatic powder coating?
Electrostatic Adsorption Failure (Inadequate Process Basis)
Electrostatic Powder Coating Principle: Relying on high-voltage static electricity, powder particles are charged, thus adsorbing onto a grounded conductive substrate.
Cut Coating Coil Surface: Exists a complete, dense, insulating organic coating (such as polyester, fluorocarbon, etc.). This coating completely isolates the electrostatic path between the powder and the conductive metal substrate.
Result: Powder is difficult to adsorb effectively, resulting in extremely low powder application rate, highly uneven coating, and the appearance of "static shadow" areas where powder cannot be applied.
Extremely poor adhesion (core quality issue)
Even if the powder manages to adhere, during subsequent baking and curing, the new powder coating and the existing color coating are bonded as a "coating-to-coating" process.
The existing color coating has a smooth surface and stable chemical properties, making it impossible to form chemical bonds or effective mechanical adhesion with the new powder layer.
Result: The newly sprayed powder layer has extremely poor adhesion, acting like a thin "skin" stuck on the surface. It peels off in large pieces very easily, even with a light scratch or a touch of tape, completely failing to achieve any protective or decorative purpose.
Baking Causes Double Damage
Powder curing baking temperatures are typically between 180℃ and 220℃, while the baking temperature for the original color coating may be only at the upper limit of this range or even lower.
Damage to the Original Coating: Excessively high secondary baking temperatures can cause the original color coating to over-cur, resulting in problems such as yellowing, embrittlement, loss of flexibility, blistering, or even scorching.
Potential Risks to the Substrate: High temperatures may affect the structure of the substrate plating (such as the zinc plating layer), reducing its corrosion resistance.

2.What is the process sequence for color-coated coils?
Coating first, then processing: The steel plate is cleaned, coated, and cured on a continuous production line, and finally delivered in the form of coils or sheets, which are then directly processed and shaped by the user.

3.What is the process sequence for electrostatic powder coating?
Processing first, coating later: Users cut, fold, weld and shape the smooth galvanized/aluminum sheet into workpieces, and then perform pretreatment (phosphating, etc.), powder spraying and curing.

4.What are the core advantages of color-coated steel coils?
High efficiency, low cost, good color consistency, environmentally friendly (no V emission), and uniform and stable coating performance.
5.What are the core advantages of electrostatic powder coating panels?
It has good coverage (it can cover welding marks and corners), thick coating, uniform coating on three-dimensional workpieces, and is flexible for single pieces or small batches.

