Chemical composition and performance characteristics of DC07

Aug 15, 2025 Leave a message

1.What is the chemical composition of DC07?

Carbon (C): ≤0.01%. This extremely low carbon content provides high ductility and good formability.
Manganese (Mn): ≤0.25%. This helps improve the strength and hardness of the steel.
Phosphorus (P): ≤0.020%. Excessive phosphorus content can reduce the plasticity and toughness of the steel. DC07 strictly controls this content to minimize these adverse effects.
Sulfur (S): ≤0.020%. Sulfur can cause hot brittleness in the steel. A low sulfur content ensures steel quality.
Titanium (Ti): ≤0.20%. This content refines the grain size and improves the plasticity and toughness of the steel.
Aluminum (Al): ≥0.015%. Aluminum acts as a deoxidizer in steel, helping to improve its structure and properties.

DC07

2.How is the formability of DC07?

Deep-drawability: Can be drawn into cylindrical parts (depth-to-diameter ratio ≥ 1.5), such as fire extinguisher housings and motor casings.

Flanging: Resists cracking when bending edges (such as the hem of a car door).

Bulging: Creates bulges through localized stretching (such as car headlight covers).

DC07

3.What is the surface quality of DC07?

The surface roughness after cold rolling is Ra ≤ 0.8 μm, making it suitable for direct coating or electroplating (galvanized version is designated DC07+Z).

It is free of scale defects, ensuring the aesthetics of home appliance exterior parts (such as refrigerator doors).

DC07

4.What are the craftsmanship and material selection recommendations for DC07?

Pre-stamping Treatment:

Lubrication is required (apply 1-3 g/m²) to reduce die friction.

Welding Compatibility:

Low-carbon content is suitable for spot welding and laser welding, but heat input must be controlled to avoid grain coarsening.

Alternative Materials:

Higher requirements: Choose DC06 (r-value ≥ 2.3, ultra-deep drawing grade).

For increased strength: Choose H220YD+Z (galvanized high-strength steel, offering both rust resistance and load-bearing properties).

 

5.What are the performance characteristics of DC07?

Excellent Formability: Elongation ≥44%, maintaining good plastic deformation during stamping and stretching, suitable for deep drawing and complex forming operations, and can be used to manufacture complex-shaped parts.
Excellent Weldability: Low carbon content and low impurity elements reduce the risk of defects such as pores and cracks during welding, resulting in high-quality welded joints.
Excellent Surface Quality: Highly smooth surface makes it easy to coat and plate, meeting product appearance requirements and improving rust resistance.
Stable Mechanical Properties: Tensile strength typically ranges from 250-310 MPa, yield strength from 100-150 MPa, and hardness from 60-90 HRB. The excellent overall mechanical properties ensure it meets the requirements of various working conditions.