Q: What are the thickness and width ranges for SPCE steel coils?
A: Standard thickness is 0.12-3.0mm (JIS standard core range 0.25-2.5mm), width is 600-2050mm. Custom slitting widths are available upon request. Tolerances must conform to standards or contractual agreements (e.g., thickness tolerance ±0.02mm).
Q: What are the key chemical composition indicators for SPCE?
A: Core components (mass fraction): C≤0.10%, Mn≤0.45%, P≤0.030%, S≤0.030%, Als≥0.020% (aluminum is used as a deoxidizer to improve resistance to aging), the remainder mainly consists of iron and trace impurities.
Q: What are the mechanical property requirements for SPCE? A: ① Tensile strength ≥ 270MPa; ② Yield strength ≤ 220MPa; ③ Elongation after fracture: ≥ 43% for thickness 0.25-1.0mm, ≥ 32% for thickness 1.0-2.5mm. The elongation decreases slightly with increasing thickness, but is still higher than that of ordinary cold-rolled steel.
Q: What are the standard inner diameter and single coil weight for SPCE steel coils?
A: The standard inner diameter is 508mm or 610mm (compatible with mainstream uncoiling equipment), and the single coil weight is 3-14 tons, which can be adjusted according to production needs. Small batch orders can be negotiated and customized with a small coil weight of 2-3 tons.
Q: What is the weldability of SPCE? What welding methods is it suitable for?
A: Excellent weldability. The low carbon content (C≤0.10%) avoids welding cracks. It is suitable for conventional methods such as arc welding, resistance welding, and gas shielded welding. The strength loss after welding is ≤ 10%. Resistance welding is commonly used for splicing automotive parts and household appliance structural components.

