Cold Rolled Steel Coil DC01, DC03 and DC04: SPCC Equivalents and Applications

Aug 04, 2025 Leave a message

Overview of DC01, DC03 and DC04 Cold Rolled Coil

DC01, DC03 and DC04 are three forming grades from the cold rolled low carbon steel family defined in EN 10130, supplied as coil, slit strip and cut to length sheet. They share the same cold reduction route, which produces a smooth, bright surface with a finer and more uniform grain structure than hot rolled material, but they differ in carbon content, annealing practice and the amount of deformation they will accept before a part tears or thins excessively. A fourth designation, SPCC, appears in the same purchasing conversation because it is the Japanese commercial quality equivalent used across Asia.

Grade Selection: DC01, DC03 and DC04

Grade Formability level Recommended work
DC01 General purpose forming, equivalent designation 1.0330 Bending, roll forming, simple press panels
DC03 Deep drawing quality Drawn housings, pans and covers
DC04 Deep drawing steel with excellent behaviour under all types of deformation, carbon max 0.08 %, manganese max 0.40 % Parts with high forming requirements

The choice is driven by the shape of the part, not by habit. Where the tooling involves only gentle bends and a generous bend radius, DC01 is the economical answer and rolls and folds cleanly. When the draw depth grows and the material must flow into a cavity, DC03 reduces the risk of local necking. Where the forming requirement is severe and the part must hold a complex shape, DC04 is the grade that gives the extra ductility, because its chemical composition is balanced to deliver the required mechanical properties.

SPCC and Its Equivalent Grades

SPCC is defined in JIS G 3141 as cold rolled steel sheet and strip of commercial quality. Because drawings and purchase orders frequently quote older or national designations, an equivalence table is a practical tool when confirming a replacement material.

Designation Standard / origin Note
SPCC JIS G 3141 Commercial quality cold rolled sheet and strip
Q195, Q215A Chinese GB grades Commonly quoted equivalents for SPCC
St12 DIN 1623 Withdrawn designation, replaced by DC01 under EN 10130
DC01 EN 10130 Current European designation for the same general forming level

SPCC is also worth understanding structurally: the first letter stands for steel and the second for plate, which is why the designation is used for flat product only. In the same commercial family, SPCD covers drawing quality and SPCE covers deep drawing quality, mirroring the progression in the DC series.

Carbon Steel or Stainless Steel?

Cold rolled coil of the DC and SPCC type is carbon steel, not stainless steel. It lacks the minimum 10.5 % chromium content needed to form the passive, corrosion resistant layer that defines stainless steel, so unprotected cold rolled sheet will rust in a damp environment and normally needs oiling, painting, galvanizing or another coating. In exchange, cold rolled carbon steel costs less than stainless and is easier to cut, form and weld, which is why it remains the default material for the great majority of press and roll formed parts.

Typical Applications

Automotive body panels, structural members and brackets.

Electrical appliances, cabinets, housings and internal fittings.

Steel office furniture, shelving and storage equipment.

Containers, drums and general metal packaging.

Roll formed building profiles and cable management systems.

Base coil for subsequent galvanizing, painting or coil coating lines.

Frequently Asked Questions

Q: What is SPCC steel equivalent to?
SPCC is cold rolled steel sheet and strip of commercial quality as defined in JIS G 3141. It is commonly equated with the Chinese grades Q195 and Q215A and with the German grade St12, which has since been replaced by DC01 under EN 10130.

Q: Is SPCC stainless steel?
No. SPCC is a carbon steel. It does not contain the minimum 10.5 % chromium required to form the passive, corrosion resistant layer that defines stainless steel.

Q: What are cold rolled steel coils used for?
Cold rolled steel sheets and coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of containers and many other products closely connected to daily life.

Q: Why is the letter P used in SPCC?
The first letter S stands for steel and represents the material, while the second letter P stands for plate, indicating that the designation applies to flat rolled product.

Q: Is cold rolled steel the same as stainless steel?
No. Cold rolled steel starts as ordinary carbon steel that is rolled through powerful machines to make it thinner and smoother. It does not have the durability of stainless steel, but it is more affordable and easier to work with.

Q: How do I choose between DC01, DC03 and DC04?
Match the grade to the forming severity. DC01 suits bending and roll forming, DC03 suits deep drawing, and DC04 is selected where the part has high forming requirements and the tool must produce a complex shape without tearing.