Cold Rolled Steel Coil Sheet Designed for High Strength Corrosion Resistance and Weldability

Nov 13, 2025 Leave a message

What is the production process of cold-rolled steel sheet? Core process: Hot-rolled coil → Pickling (removing oxide scale) → Cold rolling (multi-pass reduction) → Annealing (baffle annealing or continuous annealing) → Leveling (adjusting sheet shape and controlling surface roughness) → Shearing/slitting → Inspection and warehousing.

 

What is the role of pickling in cold rolling production?

It removes iron oxide scale (FeO, Fe₂O₃, Fe₃O₄) from the surface of the hot-rolled sheet, preventing the scale from scratching the steel surface during rolling, and ensuring good contact between the steel sheet and the rolls.

 

What is the "reduction rate" in cold rolling? What impact does it have on the steel sheet?

The reduction rate is the ratio (%) of the decrease in steel sheet thickness before and after rolling to the original thickness. A higher reduction rate results in higher strength and hardness, but lower toughness and plasticity, requiring annealing to balance these properties.

 

What is the purpose of the leveling process? ① Improve the shape of the steel sheet (eliminate waviness and warping); ② Control surface roughness (to meet the adhesion requirements of subsequent coating and stamping); ③ Slightly adjust thickness accuracy; ④ Eliminate some residual stress.

 

How are the surface quality grades of cold-rolled steel sheets classified? Common grades: Standard (FA), Higher Grade (FB), High Grade (FC), Super High Grade (FD). Higher grades have fewer surface defects (such as scratches, pitting, and oxidation), suitable for applications with high appearance requirements (such as appliance casings and automotive interiors).