Q: What is the common thickness range for SPCC cold-rolled coil?
A: Conventional thicknesses range from 0.3mm to 3.0mm. Special thicknesses (such as ultra-thin 0.15mm and extra-thick 4.0mm) can be customized.
Q: What are the width specifications for SPCC cold-rolled coil?
A: Common widths are 1000mm, 1219mm, and 1500mm. Strips (such as 50mm and 100mm) can also be slit into narrower strips based on downstream needs.
Q: What are the typical inner and outer diameters of SPCC coils?
A: The inner diameter is typically 508mm (internationally standard) or 610mm. The outer diameter ranges from 800mm to 1800mm depending on weight. The typical single coil weight is 5-15 tons.
Q: What processing techniques are suitable for SPCC?
A: It is suitable for conventional processing such as stamping, bending, shearing, welding, and drawing (for simple drawing, SPCC is recommended for complex deep drawing). Q: What precautions should be taken when stamping SPCC parts?
A: Lubrication methods (such as stamping oil) should be selected based on the complexity of the forming process to prevent surface scratches caused by excessive friction. For deep-drawn parts, annealing is recommended to improve plasticity.
Cold Rolled Steel Coil SPCC DC01 St12
Oct 23, 2025
Leave a message

