Cold Rolled Steel Coils DC04 Cross-industry applications: From home appliances to the sky

Oct 30, 2025 Leave a message

DC04 Cold Rolled Steel Coils

 

DC04 is a high-quality deep-drawing grade cold-rolled low-carbon steel defined in the European standard EN 10130. Its core value lies in the deep-drawing performance and surface quality far exceeding that of ordinary cold-rolled sheets through precise cold-rolling process and annealing treatment, which is particularly suitable for the manufacture of parts requiring complex deformation processing.

DC04 Cold Rolled Steel Coils


The application of DC04 cold rolled carbon steel coil has already broken through the boundaries of the automotive field:

Home appliance field: As the "steel skin" of refrigerator shells and washing machine inner drums, its surface accuracy reaches FC level (no visible defects on one side), taking into account both beauty and strength.

Architectural field: With good weldability, it is used for steel structure connectors and building templates, and the installation efficiency is increased by 40%.

 

Aerospace: Satellite structural parts use DC04 to use its low-temperature toughness to cope with the extreme environment of space.

Emerging scenarios: High-end furniture bends, electronic product brackets and even art installations all use its "hard and soft" characteristics.

 

In the wave of the automotive industry's transformation towards lightweight, DC04 cold rolled steel coil has demonstrated its irreplaceable value:

 

Thin gauge breakthrough: Handan Iron and Steel successfully rolled 0.5mm ultra-thin plates for automotive inner panels and small structural parts, reducing weight by more than 30% compared to traditional materials.

 

Manufacturing of complex parts: Stamping parts with complex curved surfaces such as side panels, roofs, and floors rely on its high elongation to form in one go.

 

Energy-saving benefits: For every ton of thin gauge DC04 plates used, the vehicle weight is reduced by about 15kg, and fuel consumption per 100 kilometers is reduced by 0.1 liters.

 

# First
Thickness range Generally covers 0.3mm - 3.0mm (thicker or thinner specifications can be coordinated according to needs).
Width range We provide a variety of commonly used widths (such as 1000mm, 1219mm, 1250mm, 1500mm, etc.), and we can provide slitting services to meet special width requirements.
Surface state Standard surface, special roughness surface, different oiling amount (such as DOS A, B, C), etc.

 

Name Cold Rolled Steel Coil Dc04
Width 800-1250mm
Thickness 0.15-2.0mm
Elongation 30-40 percent

 

  • Application Areas


Our custom-cut cold-rolled steel sheet is ideal for a wide range of industries:

 

Industry Typical Applications Recommended Material Grades and Properties
Automotive Manufacturing Interior body components, brackets, seat rails, bumper reinforcement beams, battery pack housings DC01/DC03/DC04 (deep drawing), HC340/420LA (high-strength steel), requiring high formability and strength
Home Appliance Industry Refrigerator, washing machine, air conditioner, microwave oven housings, internal components, back panels, and covers SPCC, SECC (galvanized), high surface requirements, requiring good spray adhesion
Electronics and electrical appliances Cabinets, distribution boxes, server housings, electromagnetic shielding covers SPCC, SECC (fingerprint-resistant), SGCC, requiring excellent flatness and precise dimensions
Architectural Decoration Metal ceilings, partitions, light steel keels, skirting boards, and lighting housings SPCC and DC01, surface treatments such as lamination and spray coating are available
Furniture Industry File cabinets, storage cabinets, desk partitions, supermarket shelves, display racks SPCC, ST12, requiring excellent bending and welding properties
General Hardware Various stampings, sheet metal parts, security door panels, kitchen equipment, and appliance housings SPCC, DC01, deep-drawn or standard commercial grade depending on complexity

DC04 Cold Rolled Steel Coils