1.What is the conductivity of copper coil?
Copper is a superior conductor, second only to silver.
Pure copper has an electrical conductivity of approximately 100% IACS (approximately 5.8 × 10⁷ S/m).
It is the material of choice for power transmission, transformers, motor coils, and electrical components.

2.How conductive is galvanized coil?
The base material of galvanized coils is steel, which (iron-based alloys) is a poor conductor.
Steel's electrical conductivity is very low, only about 12%-15% of pure copper (approximately 12-15% IACS).
While the zinc coating on the surface is slightly more conductive than steel (about 28% of pure copper), due to its extremely thin coating, its contribution to overall electrical conductivity is negligible and cannot alter the inherent poor conductivity of the steel substrate.

3.Why is there such a huge difference in conductivity?
Copper: The free electrons in the outermost shell of its atoms are virtually unbound by the nucleus, allowing them to move freely under the influence of an electric field, generating a strong electric current.
Steel (iron): Its atomic structure hinders the movement of free electrons, causing them to collide more frequently with atoms during their movement, resulting in high electrical resistance and a large amount of electrical energy converted into heat.

4.What are the main applications of copper coils?
Power cables: The core conductors of high- and low-voltage transmission lines.
Magnet wire: Used to manufacture windings for motors, transformers, and inductors.
Electronic components: Circuit boards, connectors, busbars, etc.
Communication cables: The conductors of coaxial cables and data cables.
5.What are the main applications of galvanized coils?
Structural components: Cable trays, electrical cabinets, and substation supports. Here, their function is support and protection, not conducting operating current.
Grounding systems: This is the most important electrical application of galvanized steel in the electrical field. In lightning protection grounding, current (such as lightning current) must be quickly conducted to the ground. Although galvanized steel has poor conductivity, increasing its cross-sectional area (e.g., using thicker galvanized flat or round steel) can meet the requirements for safely dissipating short-circuit currents or lightning currents, while also leveraging its strengths, corrosion resistance, and low cost.

