1.What are the differences in thermal conductivity?
Aluminum's excellent thermal conductivity is an inherent physical property. This allows aluminum sheets to rapidly transfer heat, making them suitable for applications requiring quick heat dissipation (such as heat sinks in electrical appliances).
Steel, on the other hand, has relatively poor thermal conductivity. The thermal conductivity of color-coated steel coils is primarily determined by their steel substrate. The organic coating (paint) on the surface is very thin (typically 20-30 micrometers), having a negligible impact on overall thermal conductivity, but it serves as an electrical insulating layer.

2.What impact do differences in thermal conductivity have on practical applications?
Building Envelope Systems (Roof, Walls):
**Corrugated Steel Sheet:** Slow thermal conductivity. In summer sunlight, the surface temperature can rise rapidly, and heat transfer to the interior is slow. It relies on backing insulation materials (glass wool, rock wool) to prevent heat from entering the room. Its insulation performance depends primarily on the insulation layer, not the sheet itself.
**Aluminum Sheet:** Fast thermal conductivity. Heat absorbed on the surface dissipates quickly, but it also conducts heat more easily to the structural layers behind. It also requires a superior insulation system to prevent heat transfer. Aluminum sheets have strong heat radiation reflection capabilities (especially light-colored coatings), helping to reduce initial heat absorption.
**Heat Dissipation Applications:**
Aluminum sheets are the absolute first choice for radiators, cooling fins, and appliance housings.
Corrugated steel coils are generally not used in active heat dissipation applications.

3.How do their high-temperature resistance and combustion performance compare?
In a fire, aluminum has a low melting point (approximately 660°C) but conducts heat quickly, potentially causing the entire structure to heat up rapidly.
Steel has a high melting point (approximately 1500°C) but conducts heat slowly, which could lead to localized overheating and damage to the coating and structure. The coating on color-coated steel coils will burn and carbonize at high temperatures.

4.When selecting materials, thermal conductivity is only one factor. What other factors need to be considered?
Strength and Stiffness: Steel generally outperforms aluminum in strength, stiffness, and fatigue resistance, making it advantageous for applications with large spans or high load-bearing requirements.
Weight: Aluminum has only one-third the density of steel, making it extremely lightweight.
Corrosion Resistance: Aluminum forms a dense oxide film when exposed to air, offering superior atmospheric corrosion resistance compared to ordinary steel. Color-coated steel coils rely on a galvanized layer and coating for protection; however, if the coating is damaged, the steel substrate may rust.
Cost: Generally, the material cost of aluminum is significantly higher than that of color-coated steel sheets.
Processing and Installation: Both are easy to process (cutting, bending), but aluminum is softer, requiring care to avoid scratches during processing.
5.If applied to building roofs and walls, what are the key factors?
Thermal design of the entire building envelope (insulation layer thickness, ventilation structure).
Material strength, weight, corrosion resistance, lifespan, and cost.
Color-coated steel wins out due to its high strength and cost-effectiveness.
Aluminum panels win out due to their lightweight, excellent corrosion resistance, and modern appearance.

