Medium-high carbon steel (such as S50C, with a carbon content of approximately 0.5%) achieves enhanced strength and hardness through increased carbon content, resulting in significant performance differences from SPCC (low carbon):
Performance SPCC (low carbon) S50C (medium carbon steel)
Tensile Strength 270-370 MPa 630-800 MPa
Yield Strength ≥130 MPa ≥370 MPa
Elongation ≥30% 10%-15%
Hardness (annealed) 60-80 HB 170-210 HB
Processing Performance Good cold workability (easy to stamp) Poor cold workability (requires heat treatment for improvement)
Core Differences:
S50C has significantly higher strength and hardness than SPCC, but exhibits significantly poor ductility. It is primarily used for parts requiring high hardness and wear resistance (such as shafts and springs) and requires a quenching and tempering process.
SPCC Due to its low carbon content, its strength cannot be significantly improved by heat treatment and it relies on cold working strengthening (such as cold rolling deformation).
Comparison with Medium-High Carbon Cold-Rolled Steel (such as S50C)
Aug 15, 2025
Leave a message

