DC01 DC02 SPCC Cold Rolled Steel Sheet Plate

Dec 02, 2025 Leave a message

Q: What processing techniques is DC01 suitable for?

A: Suitable for cold rolling, cold stamping, cold bending, deep drawing, welding, etc. It can also be used for cold heading and carburizing.

Q: What is the recommended stamping speed for DC01?

A: The standard stamping speed is 30-50 strokes/minute. For the high-strength DC01-C590, 20-35 strokes/minute is recommended.

Q: How to control the die clearance during DC01 stamping?

A: The recommended die clearance is 10%-18% of the material thickness. For complex parts, 12%-15% is recommended to reduce the risk of cracking.

Q: What are the causes and preventive measures for DC01 stamping cracking?

A: Causes include excessively fast deformation rate and excessive local strain. Preventive measures include controlling the deformation rate to ≤50mm/s, using warm stamping at 150-200℃ to improve plasticity, and using "pre-deformation + step-by-step stamping" for complex parts.

Q: What should I do if the springback of DC01 exceeds the standard after stamping?

A: This can be solved by die compensation (leaving a 3°~5° correction angle), or by optimizing the stamping process parameters to reduce stress concentration.