DC01 Z121-Z180 Galvanized Steel Plate

Dec 03, 2025 Leave a message

Q: What processing techniques is DC01 suitable for?

A: It can be used for cold heading, cold rolling, cold stamping, cold bending, and other processes. It can also be used for welding, stamping, and deep drawing.

Q: What is the recommended stamping speed for DC01?

A: The recommended stamping speed for ordinary DC01 is 30-50 strokes/minute. For the high-strength version DC01-C590, the recommended speed is 20-35 strokes/minute.

Q: How should the die clearance be controlled during DC01 stamping?

A: For ordinary DC01, the die clearance should be controlled at 10%-15% of the material thickness. For DC01-C590, it should be controlled at 12%-18%.

Q: Which type of stamping oil is suitable for the deep drawing process of DC01?

A: For the deep drawing process, it is recommended to use stamping oil with a viscosity of 100-200 cSt. For DC01-C590, an extreme pressure stamping oil with a viscosity of 200-300 cSt is required.

Q: What precautions should be taken when welding DC01?

A: Welding DC01 can easily cause embrittlement in the hardened zone. It is recommended to use pulsed MIG welding with a current of 120-150A, followed by stress relief treatment at 180-220℃ after welding. Low-hydrogen electrodes should be used during welding to avoid hydrogen embrittlement and cracking, and they can be welded without preheating.