Cold-rolled Steel Plate
GNEE STEEL provide Ultra wide and ultra large cold-rolled steel plate material processing for automotive coverings, top cover, side panel, engine hood,
The maximum size we have processed: 0.8 * 2080 * 4900
- Service process:
1： Confirm the material condition before purchase,
2. Confirm the material condition during processing,
3. Confirm the material condition during transportation,
4. Confirm the actual use of materials.
Our company can fully inform customers of all information about steel plate materials and answer their doubts about the use process.
Service tenet: Ensure material performance, ensure cutting quality, and provide stamping technical support and consultation
- Consulting services:
Explanation on the Performance Processing and Stamping Forming of Automotive Steel Plates with High Surface Requirements
Standard: Q/BQB VW50065 VDA
Thickness: 0.6 0.65 0.7 0.8 0.9 1.0
Features: Large board width and high surface accuracy
Width: 1800MM 1900MM 2000MM 2080MM
Application: Automotive components, structural components, reinforcement components, anti-collision components
Processing dimensions: Length within 6000MM, width within 2080MM
Weight: 10 tons or 20 tons per piece
Delivery time: 15-60 days
Certificate: Yes
Supply capacity: 1000 tons/month
Packaging details: Oil paper+iron sheet+wooden or iron frame
China Ultra wide and ultra large cold-rolled steel plate DC06
Cold-rolled Steel Plate Specification
| arameter | Specification |
| Length | – Sheet: 1000–6000 mm (custom) – Coil: Coil diameter Φ800–Φ2500 mm (by weight) |
| Thickness | 0.35–3.0 mm |
| Width | 700–1850 mm |
| Standard | – EU: EN 10130-2006, EN 10152-2017 – China: GB/T 5213-2019 |
| Process | – Cold rolling + Continuous annealing + Skin-pass – Optional: Galvanizing (Electrolytic ZE/Hot-dip GI) |
| Surface Treatment | Base grade (EN 10152): – FB (Standard) – FC (Improved) – FD (Advanced) Coating/Finish: – Bare (Oiled O) – Galvanized (ZE50/GI60) + Combined (P/C/O) |
| Thickness Tolerance | Coil (EN 10140): – ≤0.7 mm: ±0.03 mm – 0.7–1.5 mm: ±0.04 mm – >1.5 mm: ±0.05 mm Sheet (GB/T 708): ±0.02–0.05 mm (grade-dependent) |
Ultra wide plate for automobiles is mainly used for the following purposes
Popular specifications are in short supply!
click to get the specification sheet!
- Body components:
The inner and outer panels of car doors are formed into complex shapes through deep stamping to meet the requirements of vehicle design and assembly.
Large covering parts such asengine hood and luggage compartment lid ensure that the body of the vehicle has sufficient strength and rigidity while maintaining its appearance.
- Structural components:
The seat frame and other supporting structures can be manufactured into shapes that meet ergonomic and strength requirements through deep stamping.
Certain components of the chassis to adapt to different installation positions and stress conditions.
- Internal decorative parts:
The dashboard frame, etc., utilizes deep stamping to achieve specific shapes and installation requirements.
- Other:
Some special functional components, such as fuel tanks, may also use Shougang WISCO DC06 Ultra wide 0.65 0.7 0.8
Ultra wide deep stamped steel plates to shape them appropriately.
For example, car brands such as BMW and Mercedes Benz widely use high-quality deep stamped steel plates in body manufacturing to create exquisite and aerodynamic body designs; Toyota and other brands also use deep stamping technology in the production of seat frames and other structural components to achieve good support and comfort. The application of these deep stamped steel plates helps to improve the overall performance, safety, and aesthetics of automobiles.
