Does the weldability of cold-rolled coil change after aging?

Jan 08, 2026 Leave a message

1.What are the most direct and serious effects of surface aging (rust, contamination)?

Porosity and inclusions: Rust (mainly Fe₂O₃·xH₂O) and surface-adsorbed moisture and oil decompose under the high temperature of the electric arc, producing hydrogen and water vapor. If these gases cannot escape from the molten pool in time, they will form porosity in the weld. Oil and thick oxide scale can also directly form inclusions.

Disruption of arc stability: Uneven surface conditions affect the conduction and stability of the arc, leading to instability in the welding process and poor weld formation.

Increased risk of hydrogen-induced cracking: Moisture and rust are the main sources of hydrogen. Hydrogen atoms diffuse into the weld and heat-affected zone, and under stress, may induce delayed cold cracking, a very dangerous defect.

cold-rolled coil

2.What are the effects of internal performance aging?

Process: After cold rolling deformation, trace amounts of carbon and nitrogen atoms dissolved in the steel gradually diffuse and accumulate towards crystal defects such as dislocations over time (i.e., "aging"), pinning dislocations.

Manifestations: This leads to a slight increase in material strength and hardness, while plasticity and toughness decrease. For deep-drawing steel sheets, this impairs their formability; for welding, the main effects are:

Embrittleness in the heat-affected zone: During welding, the heat-affected zone undergoes a rapid heating and cooling cycle. Areas that have already undergone age hardening have lower toughness reserves, and under the combined effects of welding stress and hydrogen, their susceptibility to cracking increases.

Deteriorated weld formability: The decrease in base metal plasticity may slightly affect the uniformity of weld formation in certain welding methods (such as resistance welding and edge welding).

cold-rolled coil

3.What are the differences in the effects of different types of welding methods?

Arc welding (MIG/MAG, TIG, shielded metal arc welding): Highly affected by surface aging; incomplete cleaning inevitably leads to defects. It is somewhat sensitive to internal aging.

Resistance welding (spot welding, seam welding): Extremely affected by surface aging. Rust and contaminants greatly increase contact resistance, leading to unstable weld quality, spatter, incomplete penetration, and accelerated electrode wear. Surface cleaning is mandatory.

Laser welding/electron beam welding: Has the highest requirements for surface cleanliness. Any contaminants will severely interfere with energy absorption, leading to unstable welding processes and weld defects.

cold-rolled coil

4.What practical suggestions do you have?

The core issue is that surface deterioration after aging of cold-rolled coils is the primary and most direct cause of decreased weldability. Internal aging is a secondary but still important factor.

Pre-weld treatment is crucial: rigorous pre-weld cleaning is an essential step for any aged cold-rolled coil. The standard procedure should include: degreasing, removal of scale and rust (mechanical or chemical methods), and welding as soon as possible after cleaning.

 

5.How to assess the condition of materials?

If the cold-rolled coil has only minor surface rust, its weldability can generally be restored after thorough cleaning.

However, if severe corrosion (especially pitting or pitting corrosion) has occurred, not only is cleaning difficult, but the material itself may also be thinned or defective, requiring downgrading or scrapping.

For critical structural components, if severe aging of the material is suspected, a simple bending test or sampling for mechanical property testing can be considered to assess its plasticity.