What is DC01 material grade?
DC01 represents the basic grade of the DC steel family and is also known under the former designations St12 or FeP01
What is the difference between DC01 and DC03 steel?
DC01 – This grade can be used for simple forming work, e.g. bending, embossing, beading and drawing. DC03 – This grade is suitable for forming requirements such as deep drawing and difficult profiling.
What is DC03 material?
Deep-drawing quality DC03 according to DIN EN 10130
The chemical composition of DC03 is precisely defined to ensure that the material has the required mechanical properties. Typically, DC03 contains a maximum of 0.10% carbon, a maximum of 0.45% manganese and traces of phosphorus and sulphur.
Is CR4 the same as DC01?
Cold Reduced steel
Here at John Tainton, we stock and process DC01 mild steel (often referred to as CR4), in varying thicknesses from 0.9mm up to 3mm.
What is DC 04 material?
Grade DC04 is a deep-drawing steel of the DC grade family. The grade has excellent deep-drawing properties under all types of deformation. DC04 is suitable for high forming requirements.
