Electro-galvanized steel coil is electroplated with a zinc layer by a process of electrolytically galvanizing bath. The coating can be chemically treated or oiled with chromate or phosphate to protect the galvanized layer from white rust to improve corrosion resistance or paintability.
Electro-Galvanized (electro-plated) Steel is a type of cold rolled carbon steel that has been electrolytically coated with 99.99% metallic zinc uniformly applied across the coil for protection.
GNEE Steel handle a wide range of Prime Electro Galvanized Steel in the form of coils and sheets. All our products are available in various grades, dimensions and surface finishes.
Specification of Electro-Galvanized steel coil
|
Type |
JIS G3313 |
|
Grade |
SECC (Commercial) |
|
Thickness Range |
0.2 mm – 3 mm |
|
Width |
914 mm – 1524mm |
|
Weight |
According actual weight |
|
Inside Diameter |
508 mm / 610 mm |
Applications of EG Sheets
In its application, Prime Electro Galvanized Steel Coils & Sheets are primarily used for electrical appliances, specifically for white goods enclosure, oftentimes for applications like office furnishing and light fixtures with interior and exterior decorations. However, it is also used abundantly in the automotive industry for ducting, electrical units as in panel and switchboards, along with garden tools.
GNEE STEEL offers galvanneal and electrogalvanized steel in the following grades:
CS (CQ): Commercial Steel: Types A, B, and C
DS (DQ) or FS: Drawing Steel or Forming Steel: Types A and B
DDS (DDQ): Deep Drawing Steel
EDDS (IF): Extra Deep Drawing Steel
HSLAS: High Strength Low Alloy Steels: HSLAS Grade 50-80 and HSLAS-F 50-80
C1006, C1008, C1010
Half Hard
Quarter Hard
Contact us to learn more!