Factory Direct Sale SGCC CGCC Dx51d DC01 CRC PPGI Gi HDG G350 G550 Prepainted Zinc Coated Sheet Cold Rolled Hot Dipped Galvanized Steel Coil

Jun 17, 2025 Leave a message

dx51d-Galvanized-Steel-Coils-.pdf

What is dx51 material equivalent to?

SGCC

DX51D is a European standard, galvanized with 51 steel coil raw materials, equivalent to SGCC. DX51D refers to the bending and forming grade galvanized steel coil sheet, the steel grade serial number is 51, with low carbon steel as the base material.

What is the difference between DX51D and DX52D?

DX51D and DX52D are both hot-dip galvanized steels used for cold forming. DX52D has higher ductility and better elongation than DX51D. DX52D is more suitable for complex forming processes that require greater flexibility, while DX51D is used for standard forming applications

What is DX51D az150 material?

It is made of galvanized aluminum plated steel (55% aluminum, 43% zinc, 1.6% silicon). It has better corrosion resistance than galvanized steel. It is degreased, phosphatized, complexed and coated with organic paint.

What is the spec of DX51D?

DX51D steel products are produced in coils 0.4-1.6 mm thick and 950-1250 mm wide. The inner diameter of the coil is 600±20 mm and outer diameter is up to 1300 mm. Coil weight is up to 8 tons. Coils are supplied with cut edges (mill edges are also possible).

What is the difference between DX51D and DC51D?

Both DX51D and DC51D are low carbon steels with high plasticity, toughness, and weldability. However, their chemical compositions differ slightly. DX51D generally contains a lower carbon content, which helps improve the steel's plasticity and toughness.

What is the tensile strength of DX51D z275?

Strength and Durability: With a tensile strength of 270–500 MPa, DX51D is both strong and lightweight

-sgcc-cgcc-dx51d

-sgcc-cgcc-dx51d

-sgcc-cgcc-dx51d