What are the main causes of cracks in rolling mill rolls?
A: Firstly, excessive local pressure on the roll; secondly, rapid heating and cooling of the roll, such as clogged emulsion nozzles causing poor local cooling; additionally, lower winter temperatures make these cracks more likely to occur than in summer.
What are the causes and treatment methods for roll peeling?
A: The cause is that roll cracks are not treated in time, and rolling continues under high speed and high rolling force, causing the cracks to continue to develop and form blocky or flaky peeling. Minor peeling can be regrinded and reused, but severe peeling requires the roll to be scrapped directly.
What are the causes of roll sticking defects in cold-rolled coils?
A: Mainly excessive local reduction, residual broken strip fragments, strip overlap, and strip edge damage, leading to adhesion between the strip and the roll.
What is a roll-sticking defect in cold-rolled coils?
A: Excessive reduction causes the strip to form a heavy layer, slight folding, or strip misalignment, resulting in a heavy layer that leaves marks on the roll. In mild cases, there are marks on both the strip and the rolls; in severe cases, it can cause roll sticking and strip cracking.
Why does powdering occur during the annealing of cold-rolled coils?
Answer: There are three main reasons: First, excessive rolling or coiling tension leads to poor circulation of the protective gas, causing thermal resistance; second, poor strip shape, such as edge waviness or center waviness; and third, impurities in the emulsion cause powdering during annealing.

