SGCC / DX51D Galvanized Steel In Construction

Feb 03, 2026 Leave a message

Products Description

 

SGCC (per JIS G3302) and DX51D (per EN 10346) are low-carbon cold-rolled/hot-dipped galvanized forming grades. They are widely used for architectural sheet components where corrosion resistance and formability matter - not for main load-bearing structures.

 

Main Applications in the Construction Field

 

Corrugated roof panels, exterior wall cladding, ventilation ducts, roller shutters, window guards, steel-structure purlins, railings, billboard frames and embedded waterstop steel plates.

 

Weather-Resistance Measures for Outdoor Use

 

Use a 180-275 g/m2 zinc coating thickness.

Spray with fluorocarbon or polyester paint for long-term color and protection.

Increase coating thickness in coastal and high-humidity areas.

Clean surface contaminants regularly to prevent accelerated zinc corrosion.

 

Installation Precautions for Building Cladding

 

Use dedicated galvanized fasteners to avoid galvanic corrosion caused by contact between different metals.

Seal overlaps to prevent rainwater infiltration.

Avoid scratching the zinc layer during installation; promptly repair any damaged areas.

 

Dimensional Accuracy and Compatibility

 

Thickness accuracy of +/-0.02 mm and length/width accuracy of +/-1 mm are typical manufacturer capabilities - confirm the required tolerances against the applicable standard (JIS G3302 or EN 10346) for bulk purchases. Dimensional checks are required for bulk purchasing, and irregularly shaped parts must be custom-made in advance to ensure compatibility with the building structure.

 

Load-Bearing Limitations

 

SGCC and DX51D are only suitable for non-load-bearing or low-load-bearing steel structures (such as purlins and secondary frames). For main load-bearing structures, use structural steels such as Q235B or Q355B - galvanized forming grades are not strong enough and are prone to deformation.

 

Get Mill Price Now

Packaging and Shipping

 

Packaging And Shipping