The DX51D–DX55D series covers the galvanized coil grades of EN 10346, distinguished by increasing formability. This article explains the grades and the common coatings used for roofing products.
1. What Is Steel Grade DX51D Equivalent To?
DX51D is a European-standard bending-and-forming grade galvanized coil with a low-carbon steel base, equivalent to SGCC (JIS). The grade serial number 51 denotes the forming grade.
2. Difference Between DX51D and DC51D
DX51D can be produced from both cold-rolled and hot-rolled steel. DC51D is typically produced from cold-rolled steel.
3. Difference Between DX51D and DX52D
DX51D has good corrosion resistance and ductility and is the general bending/forming grade. DX52D is an improvement on DX51D with higher strength and better corrosion resistance.
4. The Full Series: DX51D to DX55D
| Grade | Formability level | Typical use |
|---|---|---|
| DX51D | Bending / forming | General profiles, purlins, roofing sheets |
| DX52D | Higher strength forming | Structural profiles with higher strength requirements |
| DX53D | Stamping | Pressed and stamped components |
| DX54D | Deep drawing | Deep-drawn parts |
| DX55D | Extra-deep drawing | Complex deep-drawn components |
Formability increases from DX51D to DX55D, with correspondingly lower yield strength and higher elongation.
5. Coating Types: AZ150 and Z200
- DX51D AZ150 - a hot-dip aluminium-zinc steel with a coating of 55% aluminium, 1.6% silicon and 43.4% zinc (Galvalume composition); offers superior resistance to heat and corrosion with high thermal reflectivity and conductivity.
- DX51D Z200 - a galvanized steel coil with a nominal zinc coating of 200 g/m², applied by continuous hot-dip galvanizing for heavy-duty corrosion protection.
6. Applications
The DX series is used for PPGI (pre-painted galvanized iron) and PPGL (pre-painted Galvalume) products, zinc-aluminium roofing coils and general construction profiles, where forming grade, coating weight and corrosion resistance are matched to the application.

Shipment of galvanized coils

