Is DC01 a CR4?
Cold Reduced steel
Here at John Tainton, we stock and process DC01 mild steel (often referred to as CR4), in varying thicknesses from 0.9mm up to 3mm.
What is the difference between DC01 and DC03 steel?
DC01 – This grade can be used for simple forming work, e.g. bending, embossing, beading and drawing. DC03 – This grade is suitable for forming requirements such as deep drawing and difficult profiling.
What is the difference between DC01 and DC04 steel?
DC04 has significantly better formability than DC01. DC04 can withstand complex shaping and deep-drawing processes without cracking. DC01 is ideal for simple forming processes such as bending, shallow drawing, and stamping
What is DC03 steel grade?
Mild low-carbon steel for cold forming
Grade DC03 exhibits excellent deep-drawing capability under all types of deformation. This grade is suitable for forming requirements such as deep drawing and difficult profiling.
What is the difference between dc01am and S235?
S235 has higher strength than DC01. Designed for structural applications, S235 offers the durability and load-bearing capacity needed for construction and engineering projects. DC01 has lower strength and is intended for applications where detailed shaping is key rather than load-bearing performance
