Q: What is the typical chemical composition of SPCC?
A: C≤0.15%, Si≤0.05%, Mn≤0.50%, P≤0.035%, S≤0.035%, low carbon, low sulfur, and low phosphorus.
Q: What are the mechanical properties of SPCC?
A: Tensile strength 270-410MPa; Yield strength ≥180MPa (not mandatory by JIS, some companies have internal controls); Elongation ≥34% (thickness ≥1.6mm).
Q: What is the hardness range of SPCC?
A: Annealed state HRB 50-70, hardness varies greatly depending on the degree of tempering, e.g., 1/2 hardness is approximately HRB 75-85.
Q: Why does SPCC need to be leveled?
A: To eliminate yield plateaus (preventing stamping slip lines), adjust surface roughness (Ra 0.5-2.0μm), improve plate shape, and provide short-term rust prevention with oiling.
Q: What is the impact of compositional fluctuations on performance? A: Excessive C/Mn ratio leads to increased strength but decreased plasticity; excessive P/S ratio leads to cold brittleness/hot brittleness, making stamping prone to cracking, and impurities must be strictly controlled.

