What is Q355 steel, and what does the grade designation mean?
Q355 is a grade in the GB/T 1591-2018 standard "Low Alloy High Strength Structural Steel," replacing the older grade Q345. "Q" represents yield strength, and "355" indicates a minimum yield strength of 355 MPa for thicknesses ≤16mm. The suffixes A/B/C/D/E indicate quality grades, corresponding to different impact toughness requirements.
2. What are the core differences between Q355, Q235, and Q345?
Strength: The yield strength of Q355 (355 MPa) is approximately 50% higher than that of Q235 (235 MPa) and 10 MPa higher than that of Q345 (345 MPa).
Performance: Q355 exhibits superior low-temperature toughness, weldability, and fatigue resistance, making it suitable for medium-to-heavy loads and complex stress scenarios.
Applications: Q235 is used for light-load structures, Q355 is the mainstream steel for building structures, and Q345 has been gradually replaced by Q355.
What are the mechanical properties of Q355?
Yield strength: ≤16mm ≥355MPa; 16-40mm ≥345MPa; 40-63mm ≥335MPa.
Tensile strength: 470-630MPa; elongation ≥21%; no cracks after 180° cold bending.
Impact energy: Grade B ≥34J at 20℃, Grade D ≥34J at -20℃.
5. What are the carbon equivalent requirements for Q355, and what impact does it have on welding?
Carbon equivalent Ceq≤0.43% (Ceq=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15). The lower the carbon equivalent, the better the weldability. When welding thick plates, the carbon equivalent must be controlled to avoid cold cracking.

