Hot Dipped Galvanized Coils DC01/DC02/DC03/DC04 Prepainted Galvanized Steel Coil

Jun 09, 2025 Leave a message

Is DC01 mild steel?

DC01 shim steel is a mild steel known for its low carbon content and cold-rolled production process, which results in a smooth surface and uniform thickness.

What is the difference between DC01 and DC03 steel?

DC01 – This grade can be used for simple forming work, e.g. bending, embossing, beading and drawing. DC03 – This grade is suitable for forming requirements such as deep drawing and difficult profiling.

What is DC01?

DC01 represents the basic grade of the DC steel family and is also known under the former designations St12 or FeP01. This grade can be used for simple forming operations such as bending, coining, beading and drawing

Is CR4 the same as DC01?

Cold Reduced steel

Here at John Tainton, we stock and process DC01 mild steel (often referred to as CR4), in varying thicknesses from 0.9mm up to 3mm. Each sheet is de-coiled and flattened to strict tolerances in our Kidderminster works, ensuring consistent quality and flatness, every time.

What is D type steel?

D – Grade tool steel is air-hardening, high carbon, and high chromium steel. This grade of tool steel has excellent abrasion resistance and maximum toughness. D – Grade steel is best used in applications for: Rolling dies. Shear blades.

What is the yield of DC01 material?

DC01+ZE is an electrolytically zinc-coated cold-rolled flat steel for cold forming with a yield strength of max. 280 MPa.

galvanized-coils-dc01

galvanized-coils-dc01

dc01