DX52D+Z Galvanized Steel Sheet
Galvanized sheet is a steel sheet that has received a specific treatment consisting of hot galvanizing. As such, The steel is immersed in a zinc crucible, so that the sheets are fully covered with this metal.
Depending on the specific sheet, the immersion may have been carried out in a zinc-iron alloy. In any case, when carried out hot, it fully adheres to the steel, so steel and bath become inseparable. This is especially the case in the case of the zinc-iron alloy, which prevents chipping to a greater extent.
Therefore, it presents an inner sheet of steel that constitutes the thickness of the sheet, but also a zinc coating which gives it that characteristic galvanization. Thus, the steel is fully protected from contact with external and atmospheric agents.
In any case, it has the same capacity to be cut, drilled and punched as any other type of steel sheet. The main difference is the presence of a new metal layer that acts as a protector for the steel body.
-
DX52D+Z Galvanized Steel Sheet Standard Specification
| Thickness | 0.12~2.5mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 1000-6000 or Since the custom |
| Surface | Normal (uneven) spangle/ Skinpassed spangle/ Regular spangle / Minimized spangles |
| Form | Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
-
DX52D+Z Galvanized Steel Sheet Equivalent Material
| Grade | Euronorm | China GB | Japanese JIS | US ASTM |
| EN 10346:2009 | GBT 2518-2008 | JIS:G3302-2005 | ASTM A653M | |
| DX52D+Z | DX52D+Z | DX52D+Z | SGCD1 | CS TypeC CS TypeB |
-
DX52D+Z Galvanized Steel Sheet Metal Content
| Grade | Element | C | Si | Mn | P | S | Ti |
| DX52D+Z | Min. | - | - | - | - | - | - |
| Max. | 0.12 | 0.5 | 0.6 | 0.12 | 0.045 | 0.3 |
Tensile strength: 270~420MPa
Yield strength: 140~300MPa
Elongation: ≥26%
GNEE STEEL also offers the following brands:Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); or as Customer's Requirement
