How is the adhesion of the coating after rolling on cold-rolled coils?

Feb 02, 2026 Leave a message

1.What are the main types of "roll coating" processes?

Roller Coating (or Coil Coating)

Process: After cleaning and passivation (chemical conversion) treatment, cold-rolled coils are uniformly coated with liquid coatings (polyester, fluorocarbon, silicone-modified polyester, etc.) using precision coating rollers on a high-speed continuous production line, and then immediately baked for curing.

Features: This is the most mainstream pre-coated metal sheet process. The coating is thin and uniform, and adhesion is ensured through complete pretreatment and curing.

Lamination/Film Lamination

Process: A pre-made plastic film (PVC, PET, PVDF, etc.) is pressed and bonded to the surface of the pre-treated cold-rolled coil using hot press rollers.

Features: Richer surface textures and colors; adhesion depends primarily on the quality of the adhesive and the lamination process.

cold-rolled coil

2.Why is the adhesion usually so good?

Ideal Pretreatment Environment:

Continuous Online Cleaning: The substrate undergoes thorough degreasing and cleaning in roll form before coating, achieving extremely high cleanliness.

Complete Chemical Conversion: Chromating or chromium-free passivation is performed via roll coating or spraying, forming a uniform and dense conversion film, which is the physical and chemical basis for adhesion (and corrosion resistance).

Controlled Curing Process:

Precise Baking: Temperature, time, and belt speed are precisely controlled in the production line oven to ensure complete cross-linking and curing of the coating, achieving optimal performance.

No Secondary Contamination:

The coating is applied in a dust-free factory environment, avoiding the risk of contamination from subsequent spraying during transportation, processing, and spraying.

cold-rolled coil

3.How to test and evaluate its adhesion?

Cross-cut Test

Standards: ISO 2409, ASTM D3359

Method: Use a special blade to score a grid on the coating surface, apply tape, and then quickly peel it off. Rate the area of ​​coating peeling (0 is best, 5 is worst). This is the most commonly used and fastest field inspection method.

Bending Test

Standard: ASTM D522

Method: The coated sheet is bent 180° around an axis of a certain diameter. The coating is then inspected for cracking or peeling at the bend. This is a key test for evaluating the coating's flexibility and adhesion, directly simulating a bending process.

Impact Test

Standard: ASTM D2794

Method: Impact the back or front of the coating with a heavy object and observe whether the coating peels off in the deformed area. Evaluate the coating's resistance to deformation.

cold-rolled coil

4.What are the key risk factors that affect its adhesion?

Insufficient substrate cleanliness: Incomplete degreasing during pretreatment is the root cause of adhesion failure.

Poor conversion film quality: The conversion film is uneven or too thin.

Incomplete curing: Insufficient baking temperature or time prevents complete cross-linking of the coating.

Processing damage: This is the most common problem. Insufficient bending radius, mold wear, and excessive stamping speed can all lead to localized cracking or peeling of the coating. Specialized fingerprint-resistant, scratch-resistant, and highly flexible coatings must be used.

Adhesive failure (for laminated boards): In high-temperature and high-humidity environments, the adhesive may age, causing blistering of the film.

 

5.What choices and usage suggestions are available for users?

Define your needs: If you require high-volume, color-consistent products with stringent environmental requirements (such as appliance casings, building steel panels, and interior partitions), pre-coated coils are the preferred choice.

Select a reliable supplier: Request coating performance test reports (especially adhesion, bending, and corrosion resistance tests), and examine their production processes and quality control systems.

Communicate your processing techniques: Inform the material supplier of your processing methods (bending radius, stamping depth, etc.) so they can recommend a suitable coating type (e.g., "bending-resistant coating").

Standardize processing operations: Use protective films, maintain molds, and employ appropriate processing parameters to protect the coating.