How is the passivation solution for cold-rolled coils recycled?

Feb 09, 2026 Leave a message

1.How can we directly recycle and reuse them?

Principle: After simple physical treatment (such as sedimentation and filtration) to remove impurities (such as iron powder and oil), fresh passivating agent and acid are added directly, the concentration is adjusted, and the solution is reused.

Applications: Suitable for chromium-free passivating solutions or passivating solutions with very low levels of contamination and components that are not prone to aging.

Key Steps:

Filtration: Use precision filters (such as bag filters or cartridge filters) to remove solid particles.

Oil-Water Separation: If rolling oil is introduced, ultrafiltration, centrifugation, or demulsifiers are required for oil-water separation.

Composition Analysis and Adjustment: Regular analysis is performed to replenish consumed components.

cold-rolled coil

2.What are the principles, advantages, and disadvantages of ion exchange?

Principle: The waste passivation solution is passed through anion exchange resin. Cr(VI) is adsorbed as CrO₄²⁻, while other metal cations (such as Fe³⁺) are either not adsorbed or removed by a cation exchange column. Chromate is then eluted with NaOH solution, followed by conversion through a cation exchange resin and concentration using an evaporator to obtain a reusable chromic acid solution.

Advantages: High recovery purity, direct reuse, high resource utilization rate.

Disadvantages: High initial investment, complex process, requires treatment of regeneration wastewater, and the resin is easily contaminated by organic matter.

cold-rolled coil

3.What are the principles, advantages, and disadvantages of membrane separation technology?

Principle: Utilizing a selective separation membrane, water, acid, chromates, and metal ions are separated under pressure. The permeate (relatively pure water and acid) can be reused or discharged, while the concentrate (rich in chromate) is returned to the passivation tank.

Advantages: High degree of automation, ambient temperature operation, and effective concentration of valuable components.

Disadvantages: Expensive membrane modules, extremely high requirements for pretreatment (oil removal, suspended solids removal), prone to membrane fouling and scaling, and limited concentration ratio.

cold-rolled coil

4.How can resources be recycled and transformed?

Evaporation Crystallization Method:

The waste passivation solution is evaporated and concentrated, then cooled to crystallize out chromates (such as sodium dichromate). However, impurities (such as nitrates and phosphates) are also concentrated, affecting product purity, usually requiring complex subsequent purification.

Preparation of Chromium Tanning Agent (for Leather Making):

Waste chromic acid solution is reduced to trivalent chromium using a reducing agent (such as sodium bisulfite or sulfur dioxide), and then processed through precipitation, filtration, and redissolution to prepare basic chromium sulfate for leather making. This is a mature resource utilization route.

 

5.What are the typical process flows of a passivation solution treatment station/recycling center?

Pretreatment Unit:

Collection and Homogenization: Different batches of wastewater are mixed evenly.

Oil Removal: Ultrafiltration membranes, coalescers, or chemical demulsification are used to thoroughly remove grease.

Filtration: Multi-stage filtration (from coarse to fine) removes all suspended solids.

Core Separation/Recovery Unit (Selected based on investment and needs):

Option 1 (High-end): "Pretreatment + Membrane Concentration (RO/NF) + Ion Exchange Purification + Evaporation Concentration". This is the highest quality and most thorough recovery option, enabling large-scale reuse of chromic acid and water.

Option 2 (Economical): "Pretreatment + Chemical Reduction Precipitation". This is not true "recovery" but rather "detoxification". Highly toxic Cr(VI) is reduced to less toxic Cr(III) using a reducing agent (such as sodium metabisulfite), and then precipitated as chromium hydroxide sludge with the addition of alkali (such as NaOH). The sludge can be disposed of as hazardous waste by a qualified unit or further calcined to produce chromium oxide green (Cr₂O₃) pigment. This is a common practice in most plants that currently lack recycling capabilities.

Post-treatment and Reuse Unit:

Evaporator: Further dehydrates the concentrate to increase the concentration of recovered materials.

Water Purification: Provides advanced treatment to the permeate from the membrane system or other process wastewater to meet reuse or discharge standards.