Pre-Painted Galvanized Iron
Click to get today's price list!
PPGI (Pre-Painted Galvanized Iron) sheets can come in various thicknesses, typically measured in millimeters (mm). The thickness can range from as low as around 0.1 mm to several millimeters, depending on the specific product and manufacturer. Common thicknesses for PPGI sheets used in roofing and cladding applications are usually between 0.1mm to 1.5 mm. However, it's important to note that the exact thickness can vary depending on the specific requirements of the project and the manufacturer's product offerings.
|
Product Name |
Color Coated Galvanized Roof Sheet PPGI |
|
Thickness |
0.2mm-0.8mm |
|
Width |
750mm-1500mm |
|
Length |
600mm-1250mm (Common Width: 914mm, 1000mm, 1200mm, 1220mm, etc.) |
|
Color |
According RAL Color Card (Can provide custom pattern) |
|
Shape |
Wavy, Trapezoidal, etc. |
|
Paint |
PE, SMP, HDP, PVDF |
|
Primer |
Epoxy primer, Polyester primer, Water soluble acrylic primer, Polyurethane primer |
|
Coating Thickness |
Top: 11-35μm, Back: 5-14μm |
PPGI steel coil specifications can vary depending on the manufacturer and specific product line. However, here are some common specifications you might find:
1) pPGI steel Material
PPGI coils are typically made from hot-dip galvanized steel or galvalume steel. The base metal provides the strength and corrosion resistance.
2) pPGI steel Material
Coating Type
PPGI stands for Pre-Painted Galvanized Iron, indicating that the steel has been coated with a layer of paint or protective coating. The type of coating can vary, including polyester(PE), silicon-modified polyester (SMP), polyvinylidene fluoride (PVDF), and high-durability polyester (HDP).
3) pPGI steel Coating Thickness
This refers to the thickness of the paint or protective coating applied to the steel. It is usually specified in micrometers (µm).
4)pPGI steel Top Coat Thickness
In a PPGI coil, there are typically multiple layers of coatings. The top coat is the outermost layer, which provides additional protection and determines the final appearance of the product.
5) Back Coat Thickness
This is the coating on the reverse side of the coil. It provides added protection and can also influence the adhesion of the coating to the base metal.
6) PPGI Steel Width
This is the width of the PPGI coil, typically measured in millimeters (mm) or inches (in).
7) Coil Weight
This is the weight of the entire coil, including both the steel and the coating. It is usually specified in kg or ton.
8) PPGI Steel Paint System
This refers to the combination of coatings used in the PPGI coil. It includes information about the type of primer, topcoat, and backcoat used.
9)PPGI Steel Tensile Strength
This is a measure of how much force the steel can withstand before it starts to deform. It is usually specified in megapascals (MPa) or pounds per square inch (psi).
10)PPGI steel Yield Strength
This is the amount of stress at which the steel begins to deform plastically. It is also specified in megapascals (MPa) or pounds per square inch (psi).
11) PPGI steel Application
PPGI coils can be designed for specific applications, such as roofing, siding, automotive parts, appliances, etc.
Remember, it's crucial to consult the manufacturer's specifications for precise details as they may vary between different products and brands.
