galvanized steel coil
Need high-quality galvanized steel for your industrial project? GNEE Steel, a professional manufacturer with 20 years of experience, provides premium S550GD galvanized steel coil at competitive factory prices. This guide will help you choose and use S550GD (1.0531) steel correctly.
S550GD is a high-strength hot-dip galvanized steel grade. The "GD" stands for "General Structure" in German standards, indicating its suitability for structural applications. The material code 1.0531 identifies it as a specific high-strength low-alloy (HSLA) steel in European standards.
Galvanized steel coil
Key Factors to Consider When Choosing S550GD Coils
- Coating Thickness: Select appropriate zinc coating weight based on environmental conditions (60-275g/m²)
- Mechanical Properties: Confirm yield strength and elongation meet your project requirements
- Dimensional Tolerance: Check thickness and width tolerances for precise fabrication
- Surface Quality: Choose between regular spangle, minimized spangle, or zero spangle finishes
- Certification: Ensure compliance with EN 10346 or other relevant standards
Fabrication Tips for S550GD (1.0531) Steel
S550GD galvanized steel coil requires proper handling during fabrication to maintain its properties.
- Cutting: Use laser cutting or shearing for clean edges without damaging the zinc coating
- Bending: Maintain minimum bend radius (3-5 times material thickness) to prevent cracking
- Welding: Use low-hydrogen electrodes and protect the weld area from corrosion
- Forming: Perform cold forming at room temperature to avoid coating damage
- Storage: Keep coils in a dry, covered area to prevent white rust formation
Quality Inspection Standards for S550GD
At GNEE Steel, we adhere to strict quality control measures for S550GD galvanized steel coil.
| Inspection Item | Standard Requirement |
|---|---|
| Chemical Composition | Conforms to EN 10346 |
| Mechanical Properties | Yield strength ≥ 550 MPa |
| Coating Adhesion | No peeling after bending test |
| Surface Quality | No major defects, minimal scratches |
| Dimensional Accuracy | Thickness tolerance ±0.05mm |
Maintenance Recommendations for S550GD Steel Structures
Proper maintenance can extend the service life of S550GD galvanized steel components.
Regularly inspect for signs of corrosion, especially in harsh environments
Clean the surface with fresh water to remove salt or industrial pollutants
Repair any coating damage immediately with zinc-rich paint
Avoid contact with dissimilar metals that may cause galvanic corrosion
Conduct periodic thickness measurements of the zinc coating
S550GD Steel Chemical Composition
In order to ensure the excellent performance of S550GD steel, we have made a precise ratio of its chemical composition. Next, we will show its key components in detail.
| Element | Content (%) |
| Iron, Fe | 98-99 |
| Carbon, C | 0.1-0.2 |
| Manganese, Mn | ≤ 1.5 |
| Phosphorus, P | ≤ 0.1 |
| Sulfur, S | ≤ 0.045 |
| Silicon, Si | ≤ 0.6 |
| Nitrogen, N | ≤ 0.012 |
| Aluminum, Al | ≤ 0.015 |
S550GD Steel Mechanical Properties
In addition to its excellent chemical composition, our S550GD galvanized steel also has outstanding mechanical properties:
| Property | Metric | Imperial |
| Tensile Strength | 550-620 MPa | 79.8-89.9 ksi |
| Yield Strength | ≥ 550 MPa | ≥ 79.8 ksi |
| Brinell Hardness | 150-190 HB | 150-190 HB |
| Rockwell Hardness | 80-90 HRB | 80-90 HRB |
| Vickers Hardness | 160-200 HV | 160-200 HV |
| Elongation | 15-20% | 15-20% |
| Elastic Modulus | 210 GPa | 30,500 ksi |
| Fracture Elongation (≤ 0.7mm) | ≥ 12% | ≥ 12% |
| Fracture Elongation (> 0.7mm) | ≥ 14% | ≥ 14% |
| Coating Adhesion (Bend Radius) | 0T-2T (0-2x thickness) | 0T-2T (0-2x thickness) |
S550GD galvanized steel coil (1.0531 material) is a reliable choice for high-strength structural applications. Partner with GNEE Steel today to get high-quality products and professional technical support for your project!
Click here to get your 2026 latest price list !
Galvanized steel coil