How to Choose Base Metal Based on Applications?
Send Us Your Requirements:
Size: the thickness, width, zinc coating thickness, coil weight?
Material and Grade: Hot rolled steel or cold rolled steel? And with spangles or not?
Application: What is the purpose of the coil?
Quantity: How many tons do you need? The MOQ is 25 tons.
Delivery: When is it needed and where is your port?
If you have special requirements, please let us know.
| Uses | Code | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation at Break A80mm% |
| General uses | DC51D+Z | 140 ~ 300 | 270 ~500 | ≧22 |
| Stamping use | DC52D+Z | 140 ~ 260 | 270 ~ 420 | ≧26 |
| Deep drawing use | DC53D+Z | 140 ~ 220 | 270 ~ 380 | ≧30 |
| Extra deep drawing | DC54D+Z | 120 ~ 200 | 260 ~ 350 | ≧36 |
| Ultra-deep drawing | DC56D+Z | 120 ~ 180 | 260 ~ 350 | ≧39 |
| Structural uses | S220GD+Z S250GD+Z S280GD+Z S320GD+Z S350GD+Z S550GD+Z |
220 250 280 320 350 550 |
300 330 360 390 420 550 |
≧20 ≧19 ≧18 ≧17 ≧16 / |
| Material | Chinese Code | Japanese Code | European Code |
| Commercial Use | DX51D+Z/DC51D+Z (CR) | SGCC | DX51D+Z |
| Drawing Quality | DX52D+Z/DC52D+Z | SGCD1 | DX52D+Z |
| Deep Drawing Quality | DX53D+Z/DC53D+Z/DX54D+Z/DC54D+Z | SGCD2/SGCD3 | DX53D+Z/DX54D+Z |
| Structural Use | S220/250/280/320/350/550GD+Z | SGC340/400/440/490/570 | S220/250/280/320/350GD+Z |
| Commercial Use | DX51D+Z/DD51D+Z (HR) | SGHC | DX51D+Z |
In general, Z stands for pure zinc coating and ZF refers to zinc-iron alloy coating. The number represents the thickness of the zinc layer. For example, Z120 or Z12 means the weight of zinc coating (double-sided) per square meter is 120 grams. While the zinc coating of the single side will be 60 g/㎡. Below is the recommended zinc layer thickness for different use environments.
| Use Environment | Recommended Zinc layer Thickness |
| Indoor uses | Z10 or Z12 (100 g/㎡or 120 g/㎡) |
| Suburban area | Z20 and painted (200 g/㎡) |
| Urban or industrial area | Z27 (270 g/㎡) or G90 (American Standard) and painted |
| Coastal area | Thicker than Z27 (270 g/㎡) or G90 (American Standard) and painted |
| Stamping or deep drawing applications | Thinner than Z27 (270 g/㎡) or G90 (American Standard) to avoid coating peeling off after stamping |


