How to manage the inventory of color-coated coils?

Nov 28, 2025 Leave a message

1.What are the core principles and objectives?

Principle 1: Protect the coating surface. The primary consideration for any management measure is preventing scratches, wear, and contamination of the coating.

Principle 2: Prevent moisture and corrosion. Once the steel substrate rusts, its value will decrease significantly.

Principle 3: First-In, First-Out (FIFO). Ensure inventory turnover and avoid long-term material stockpiling that leads to performance degradation or obsolescence.

Goals: Achieve accurate inventory records, stable quality, efficient storage and retrieval, and maximized space utilization.

Color-coated rolls

2.What are the requirements for the warehouse environment?

Indoor Warehouse:

Must be an indoor warehouse; open-air storage is strictly prohibited.

Maintain dryness and good ventilation: Relative humidity should ideally be controlled below 50% to prevent condensation. The warehouse should be equipped with appropriate ventilation facilities.

Temperature control: Avoid drastic temperature changes inside the warehouse, as these can cause condensation on the surface of the roll material, a major cause of corrosion.

Cleanliness: Keep the warehouse floor clean and reduce dust.

Floor and Stacking Pads:

Stacking pads (sleepers) must be used: The roll material must not be in direct contact with the ground. The pads should be high enough to prevent water accumulation and allow for easy forklift operation.

Level and firm floor: Capable of supporting the heavy weight of the roll material.

Color-coated rolls

3.What are the storage guidelines and techniques?

Vertical Storage:

Preferred method. Place the color-coated rolls upright on V-shaped or saddle-shaped shelves.

Advantages:

Even stress distribution, less prone to deformation.

Easy inspection and retrieval.

Reduces contact area with the ground, lowering the risk of moisture damage.

Horizontal Stacking:

If horizontal stacking is necessary, strictly adhere to the following rules:

Use Saddles: The bottom must be supported by professional curved saddles to ensure even stress distribution on the rolls.

Limit Stacking Layers: "Pyramid" stacking is strictly prohibited. The number of stacking layers should be strictly limited based on the weight and size of the rolls (usually no more than 3 layers).

Alignment: Ensure all rolls are aligned vertically to prevent indentations or deformation of lower rolls.

"First-In, First-Out" Layout: Place the rolls that entered the warehouse first on the outside and top for easy retrieval.

Moisture Protection and Isolation:

During humid seasons or in humid regions, desiccants can be placed around the stacks.

Rolls of different materials (e.g., galvanized coils, aluminum coils) and different coatings (e.g., PVDF, PE) should ideally be stored separately.

Storing with chemicals (e.g., acids, alkalis, solvents, etc.) is strictly prohibited.

Color-coated rolls

3.How to use an information management and identification system?

A clear labeling system:

Each roll of material should have a unique identifier (label or hangtag).

Label information should include:

Material (e.g., GI, GL, AA)

Color/Coating Type

Specifications (Thickness * Width)

Length/Weight

Production Batch Number/Furnace Number

Inbound Date

Warehouse Zoning and Location:

Logically zone the warehouse according to specifications, color, or customer.

Assign a unique number to each storage location (e.g., A-01-02).

In the inventory management system, bind the roll material information to the storage location number for rapid location tracking.

Digital Management:

Use inventory management software or an ERP system.

Update inventory data in real time, including inbound, outbound, relocation, and inventory count operations.

The system should automatically issue warnings for materials that have been in stock for too long and generate a "first-in, first-out" (FIFO) delivery list.

 

4.What are the requirements for daily operating procedures?

Incoming Inspection:

Inspect for any damage during transportation.

Verify that the label information matches the delivery note.

Confirm that the packaging (e.g., side panels, waterproof paper) is intact.

Handling Operation:

A professional roll material forklift must be used, employing fiber optic slings. Direct lifting with steel wire ropes is strictly prohibited to avoid damaging or scratching the coating.

Handle with care to avoid collisions.

Operators should receive professional training.

Outbound Principle:

Strictly adhere to the "First-In, First-Out" (FIFO) principle. Warehouse staff should pick goods according to the FIFO list generated by the system.

Recheck the surface quality and label information of the outbound roll material to ensure consistency with the outbound slip.

 

5.What are the prohibited behaviors?

Open-air storage, damp environment; direct ground storage, pyramid-shaped stacking; use of steel wire ropes, rough handling; no labels, finding goods by memory; last-in, first-out, no inspection before warehousing.