1.What are the material requirements for photovoltaic brackets?
Photovoltaic racks are exposed to outdoor environments for long periods of time and must withstand wind, sun, rain, snow, and various corrosive substances (such as salt spray and chemical pollutants). Therefore, the core requirements for materials are high strength and excellent corrosion resistance.

2.What effect does corrosion resistance have on photovoltaic brackets?
Zinc's barrier protection: The zinc coating tightly covers the steel surface, physically isolating it from corrosive media such as moisture and air.
Zinc's sacrificial anodic protection: Even if the zinc coating is partially damaged by scratches or cuts, exposing the steel substrate to the environment, the zinc will preferentially corrode as a "sacrificial anode," protecting the underlying steel from corrosion. This self-healing ability is crucial.
Long service life: Depending on the thickness (zinc weight) of the zinc coating, galvanized steel can have a service life of 20, 25, or even longer, perfectly matching the 25-year lifespan requirement for photovoltaic systems.

3.Why is galvanized coil an ideal choice for photovoltaic mounting systems?
Excellent Mechanical Strength
Steel possesses inherently high strength and rigidity, easily supporting the weight of photovoltaic panels and withstanding the significant loads posed by severe weather conditions such as strong winds and heavy snow. This allows for lightweight support structures while ensuring safety.
Good Economic Performance
Compared to other corrosion-resistant materials (such as aluminum alloys and stainless steel), galvanized steel offers the highest cost-effectiveness while maintaining adequate performance and longevity, making it a key factor in achieving grid parity for photovoltaic power plants.
Proven Processing Technology
Galvanized coils are ideally suited for large-scale industrial cold bending, punching, and roll forming, enabling efficient production of various standard cross-section support profiles (such as C-sections, U-sections, and Z-sections).

4.What are the key parameters of galvanized coils for photovoltaic brackets?
Substrate Material and Strength: Structural steel grades such as S350GD+Z or S550GD+Z are commonly used. The number represents the minimum yield strength (in MPa). Higher strength means thinner steel can be used under the same load, saving material and cost.
Zinc Coating Thickness/Weight: This is a key factor in determining corrosion resistance and lifespan. A common standard is a double-sided zinc coating weight of at least 60g/m² to 100g/m² or higher. In highly corrosive environments such as coastal areas and industrial areas, the requirement is increased to 120g/m² or even higher. The corresponding zinc coating thickness is approximately 8-15 microns.
Surface Treatment: In addition to conventional pure zinc coatings, zinc-aluminum-magnesium coatings (such as AZ150) are also available. Zinc-aluminum-magnesium coatings offer enhanced corrosion resistance, resistance to shear corrosion, and improved self-healing properties, making them a future trend and particularly advantageous in harsh environments.
5.How do galvanized coil supports compare to aluminum alloy supports?
Galvanized steel brackets are high in strength and can be made smaller in cross-section; aluminum alloy brackets are lower in strength and require a larger cross-section to achieve the same strength.
Galvanized steel bracket has excellent corrosion resistance (depends on the galvanized layer),Aluminum alloy bracket has excellent corrosion resistance (natural oxide film)
Galvanized steel brackets are the most popular choice for most ground-mounted power stations and industrial and commercial rooftops. Aluminum alloy brackets are mainly used for weight-sensitive home rooftops, BIPV, or highly corrosive environments.

