What is the specification of SPCC material?
SPCC Steel Specifications
The common specification of SPCC cold rolled sheet is 0.5-3.0 mm*1,250 mm*2,440 mm; The max width and length can reach up to 2,000mm and 6,000 mm. while the specification of SPCC cold-rolled strip and coil is 0.3-2.5 mm *355-1,500 mm.
Why is it called cold rolled steel?
"Cold rolling" refers to processes done at or near room temperature. Although these techniques affect overall performance and application, they should not be confused with formal specifications and grades of steel, which relate to metallurgical composition and performance ratings.
How thick is a cold rolled coil?
0.2 mm to 2.0 mm
Cold rolled steel is made using hot rolled steel through pickling, cold rolling and heat treatment. It is relatively thin with a thickness of 0.2 mm to 2.0 mm. Cold rolled steel is highly aesthetic and easily machinable, thus widely used for premium applications in modern society.
How thick is SPCC steel?
SPCC Cold Rolled Steel Sheet Features
The thickness of cold-rolled plate is generally between 0.1 and 8.0mm, and the thickness of cold-rolled plate produced by most factories is below 4.5mm.
What is SPCC vs SGCC steel?
Both SECC and SGCC have good corrosion resistance due to galvanizing treatment. Among them, SGCC has slightly stronger corrosion resistance because the hot-dip galvanized layer is thicker and more uniform. SPCC has poor corrosion resistance and requires additional anti-corrosion treatment during use
